Name: T&S EC-3107-LMV Deck-Mounted Hands-Free Sensor Faucet with 4 1/8" Gooseneck Spout and 2.2 GPM Vandal-Resistant Aerator
Brand: T&S Brass and Bronze Works
SKU: 510EC3107LMV
Price: 417.17 USD
Availability: LimitedAvailability

A chrome T&S hands-free sensor faucet with a gooseneck spout.

$417.17/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Earn up to $12.52 back (1,252 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Not eligible for expedited shipping

Product Overview

6 1/8" wide deck-mounted base, 2 mounting holes on 4" centers
10 15/16" tall gooseneck spout, 4 1/8" length
2.2 GPM vandal-resistant aerator
Water-resistant control box with AC adapter and battery backup (4 AA batteries included)
Mixing valve and supply lines sold separately

UPC Code:400014220324

View all T&S Brass and Bronze Works Medical Faucets

Quantity: 1/Each
Shipping Weight: 6 lb.
Spout Length: 4 1/8 Inches
Faucet Width: 6 1/8 Inches
Faucet Height: 10 15/16 Inches
Battery Type: AA
Faucet Centers: 4 Inches
Features: ADA Compliant Flex Inlets Included Hands Free Motion Sensor
Finish: Chrome
Flow Rate: 2.2 GPM
Material: Brass
Mounting Holes Required: 2 Mounting Holes
Mounting Style: Deck Mounted
Plug Type: NEMA 1-15P
Pressure Rating: 125 PSI
Spout Clearance: 6 15/16 Inches
Spout Type: Gooseneck
Temperature Rating: 140 Degrees Fahrenheit
Type: Touchless Faucets

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works EC-3107-LMV Details

This T&S EC-3107-LMV deck-mounted hands-free sensor faucet is a great way to help make your restroom contact-free, improving safety and sanitation! Because it uses an electronic sensor to control the water flow, this model eliminates a key contact point for germs to spread - the faucet handles. The faucet's electronics are housed inside a water-resistant control module, which installs out of the way below the countertop and is powered by an AC adapter with a battery backup (4 AA batteries included), so that you can always operate it, even in the event of a power outage. The control module can alternatively be hardwired using the terminals on the back.

The 10 15/16" tall gooseneck spout provides an elegant design and ample space for hand-washing, while a 2.2 GPM vandal-resistant aerator creates a gentle flow pattern with minimal splashing. And since the aerator is vandal-resistant, it's well-suited to high-traffic areas. It installs on a 6 1/8" wide base, and requires 2 mounting holes on 4" centers. An 18" flexible stainless steel water hose and a 24" sensor cable connect the faucet to the control module. It requires a temperature control valve and hot / cold supply lines (sold separately) to connect it to your building.

Overall Dimensions:
Spout Length: 4 1/8"
Faucet Height: 10 15/16"
Faucet Width: 6 1/8"

Due to US DOT shipping regulations, we are unable to ship this product to Alaska, Hawaii, and international destinations. It is also ineligible for next day or second day shipping and cannot be returned. Please contact Customer Solutions prior to placing your order if you have any questions or concerns.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

1-15P
This unit comes with a NEMA 1-15P plug.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.