$299.47/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Earn up to $8.98 back (898 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 5 1/2" and 5 5/8" spouts
  • Single hole, single temperature faucet
  • Single hose cock for more convenient use
  • 1/2" NPT female inlet
  • Quarter-turn Eterna cartridge with spring check and 4-arm lab handle
UPC Code:400010581375

T&S Brass and Bronze Works BL-6050-01 Specs

Quantity
1/Each
Shipping Weight
4.62 lb.
Spout Length
5 1/2 - 5 5/8 Inches
Faucet Width
3 3/8 Inches
Faucet Height
18 3/16 Inches
Cartridge Type
Compression
Faucet Centers
Single
Features
ADA Compliant  Made in America
Finish
Chrome
Flow Rate
4.31 GPM
Handle Type
4 Arm
Material
Brass
Mounting Style
Deck Mounted
Number of Spouts
2 Spouts
Pressure Rating
20 - 125 PSI
Spout Clearance
2 3/16 - 11 3/16 Inches
Spout Type
Gooseneck
Temperature Rating
40 - 140 Degrees Fahrenheit
Type
Laboratory Fixtures
Usage
Water
Water Inlet Size
1/2 Inches

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works BL-6050-01 Details

This T&S BL-6050-01 deck mount multi-water laboratory faucet is the perfect solution when you need a reliable water fixture for your classroom, medical facility, or any other laboratory setting. This single hole, single temperature faucet is incredibly simple to install and features a 18 3/16" gooseneck nozzle with a 5 5/8" spread that offers plenty of clearance for beakers and test tubes. Both the nozzle and the independently-controlled hose cock feature serrated tips, giving you multiple water outlets that easily accommodate a hose connection.

This faucet is engineered for maximum durability and uses a quarter-turn Eterna cartridge to adjust the flow rate. This cartridge provides excellent longevity thanks to a solid brass spindle and body. When the 4-arm handle of this faucet are turned, the spindle lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.

T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!

Overall Dimensions:
Spout Length: 5 1/2" - 5 5/8"
Faucet Height: 18 3/16"
Faucet Width: 3 3/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • CSA, Canada

    CSA, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
T&S Brass and Bronze Works BL-6050-01

A PDF viewer is required to view this product's information. Download Adobe Acrobat software