$286.27/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- Push-button activation with automatic stop
- Fits decks up to 1 1/2" thick
- Quantity
- 1/Each
- Shipping Weight
- 3 lb.
- Spout Length
- 4 1/16 Inches
- Faucet Width
- 5 15/16 Inches
- Faucet Height
- 3 3/4 Inches
- Cartridge Type
- Metering
- Faucet Centers
- 4 Inches
- Features
- ADA Compliant Made in America
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Handle Type
- Pivot Action
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 1 1/2 Inches
- Spout Type
- Cast
- Temperature Rating
- 40 - 140 Degrees Fahrenheit
- Type
- Faucets
- Water Inlet Size
- 3/8 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
T&S Brass and Bronze Works B-2760-H Details
This T&S B-2760-H deck mount metering lavatory faucet features a push button metering cartridge for simple one-touch activation and a 0.5 GPM vandal resistant spray outlet for consistent, even water flow. The handle rotates to allow for simple temperature adjustment, and the chrome plated solid brass body provides a sleek and professional appearance. It has two in-line check / screen assemblies with 9/16-24 UN threads to fit supply stops (sold separately), while the central 3/8" O.D. copper inlet tubes supply adequate hot and cold water. It sits on 4" centers and can be mounted on any deck up to 1 1/2" thick.
Overall Dimensions:
Spout Length: 4 1/16"
Faucet Height: 3 3/4"
Faucet Width: 5 15/16"
Made in America
This item was made in the United States of America.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
3/8" Water Connection
This unit comes with a 3/8" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-2760-H
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources