$175.17/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- 2.2 GPM
- Quantity
- 1/Each
- Shipping Weight
- 19.6 lb.
- Spout Length
- 4 3/8 Inches
- Faucet Width
- 5 3/4 Inches
- Faucet Height
- 5 15/16 Inches
- Faucet Centers
- 4 Inches
- Features
- With Drain
- Flow Rate
- 2.2 GPM
- Handle Type
- Lever
- Mounting Style
- Deck Mounted
- Spout Clearance
- 2 5/16 Inches
- Spout Type
- Cast
- Temperature Rating
- 140 Degrees Fahrenheit
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
I live in California. Can I purchase this product?
This product cannot be shipped to California.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
T&S Brass and Bronze Works B-2710 Details
This ADA Compliant T&S B-2710 single lever faucet features a forged brass body with a 4" centerset faucet. It is designed with a 4" handle and temperature limit stops, and also boasts a convenient pop up drain that allows you to drain a sink without reaching your hand into the water.
This T&S B-2710 single lever faucet includes 1/2" NPSM male inlet shanks and a 2.2 gallon per minute aerator.
Overall Dimensions:
Spout Length: 4 3/8"
Faucet Height: 5 15/16"
Faucet Width: 5 3/4"
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
CSA, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Need Parts & Accessories?
Show replacement parts and accessories for T&S Brass and Bronze Works B-2710 today!
Resources and Downloads for
T&S Brass and Bronze Works B-2710
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources