$138.32/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Quick Shipping
Usually ships in 1 business day
Product Overview
- Two ergonomic lever handles
- Fits sink tops up to 1 3/8" thick
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 4.44 lb.
- Spout Length
- 3 3/4 Inches
- Faucet Width
- 8 5/8 Inches
- Faucet Height
- 3 5/16 Inches
- Cartridge Type
- Compression
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 1 7/16 Inches
- Spout Type
- Cast
- Temperature Rating
- 40 - 140 Degrees Fahrenheit
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Details
The T&S B-0871 deck mounted lavatory faucet features two ergonomic lever handles with color coded indexes. It also has an efficient 2.2 GPM aerator to help your facility conserve water.
This lavatory faucet comes with 1/2" NPSM male shanks with 1/2" NPSM coupling nuts and requires holes punched on 4" centers for installation. There is 3 3/4" clearance from the inlet to the outlet, and 1 7/16" clearance from the deck to the aerator.
Overall Dimensions:
Spout Length: 3 3/4"
Faucet Height: 3 5/16"
Faucet Width: 8 5/8"
Attention CA Residents:
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
Made in America
This item was made in the United States of America.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Electric Hand Dryers
177 Products
Wet Floor Signs
50 Products
