|
The Energy Policy Act of 2005 (EPAct), in
effect since January 1, 2006, states that all
pre-rinse units and replacement spray
valves used for ware washing must have a
maximum flow of 1.6 gpm at 60
psi.
Now,
more than ever, water conservation is a
primary concern in the foodservice
plumbing industry. The Food Service
Technology Center (FSTC) appliance
testing laboratory says that "a low-flow pre-
rinse spray valve is one of the easiest and
most cost effective energy saving devices
available," reducing water consumption,
water heating energy and sewer
charges.
T&S was first to bring the
pre-rinse to the
foodservice plumbing industry, and we
quickly became the standard. Today, the
new JeTSpray shows that T&S has
reinvented the spray valve. The fast-rinsing
and EPAct compliant B-0108 JeTSpray
valve offers power and
efficiency. With a flow rate of 1.48 gpm this
model offers
the cleaning efficiency and durability you
have come to expect from
T&S.
This T&S B-0108 spray valve
can be used with most commercial pre-
rinse hoses. A repair kit is available under
item 510B108HSFRK.
Limited 1-Year Warranty
READ THIS LIMITED ONE-YEAR WARRANTY BEFORE INSTALLING OR USING THIS PRODUCT. IF THESE TERMS ARE NOT ACCEPTABLE
TO YOU, IMMEDIATELY RETURN THIS PRODUCT TO T&S BRASS AND BRONZE WORKS, INC BEFORE INSTALLING AND/OR USING
THIS PRODUCT.
T&S Brass nd Bronze Works, Inc. (T&S) warrants to the original purchaser (other than for purposes of resale) of this product that such product
is free from defects in workmanship and materials for a period of one year from the original date of purchase. During this one-year warranty
period, if this product is found to be defective, T&S shall, at its option, repair and/or replace it. To obtain warranty service, products must be
returned to T&S Brass and Bronze Works, Inc., 2 Saddleback Cove, Travelers Rest, South Carolina 29690, clearly marked to the attention of
the Warranty Repair Department. Shipping, freight, insurance and other transportation charges of the returned product to T&S and the return
of the repaired or replaced product to the purchaser are the responsibility of the purchaser. Replacement and/or repair under this warranty shall
be made within a reasonable time after receipt by T&S of the returned product.
This warranty does not cover this product if it has received secondary finishing or has been altered or modified after purchase or for defects
caused by physical abuse to or misuse of the product, or shipment of the product.
ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND ANY REMEDY FOR BREACH OF CONTRACT WHICH BUT FOR THIS
PROVISION MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO
THE ABOVE ONE-YEAR PERIOD.
UNDER NO CIRCUMSTANCES SHALL T&S BRASS BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY LOSS OF USE
OF THE PRODUCT OR ANY SPECIAL OR CONSEQUENTIAL COSTS, EXPENSES OR DAMAGES WHETHER ARISING OUT OF BREACH
OF WARRANTY, BREACH OF CONTRACT OR OTHERWISE INCURRED BY THE PURCHASER OR ANY OTHER USER.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
|
Loading
Suggestions...
for all your restaurant supply needs!
