$53.99/Each

  • EPAct 2005 Compliant
  • 0.65 GPM flow rate
  • Fast rinsing power & efficiency
  • Handle locking ring
  • Heavy duty - tested to over 1 million cycles
  • Lead free compliant
Item:
510B0107C
Units:
Each
Shipping:
Usually Ships 1 Business Day
When will I receive my Item?
Reviews:
1 review
MFR Item:
B-0107-CM
UPC Code:
671262000772
TS Brass B-0107C Super Low Flow Pre-Rinse Spray Valve

TS Brass B-0107C Super Low Flow Pre-Rinse Spray Valve

In 1947, T&S introduced the first pre-rinse unit to the foodservice industry. Within four decades, we had already innovated it into the first low flow unit, designed to save water and energy. Our pre-rinse units were the first to be endorsed by the green restaurant association, and the T&S name has always carried the assurance of top-quality performance and unbeatable service. Today, T&S has taken pre-rinse innovation to the next level.

We have completely overhauled the B-0107-C spray valve used in our pre-rinse units, keeping all of its superior construction, while dramatically reducing the amount of water it uses. You may be familiar with EPAct, the Energy Policy Act of 2005. That legislation set a maximum flow rate for spray valves at 1.6 gallons per minute at 60 psi. You may also be aware that T&S spray valves have always beaten this standard, some by as much as 25%. Our revolutionary new B-0107-C Valve performs at only .65 gallons per minute at 60 psi. 0.65- that's a water savings of 60% over EPAct standards.

Now, you may be thinking, the flow rate may be lower, but what about the performance? I may be saving water, but surely it takes longer to clean, right? Wrong. T&S subjected our new B-0107-C Valve to the dried-on tomato paste test, using the most stringent state standard. California requires a clean plate after only 30 seconds. In addition, other organizations' requirements are 26 seconds or under. At T&S, we have always endeavored to beat this time with our spray valves, to reach a more stringent goal of 21 seconds or less. Even though the new B-0107-C Valve has a drastically reduced flow, it still cleans the plate within the strict California standard, as well as our own, more rigorous standard. Way less water, just as fast! How does our new B-0107-C Valve line up with the competition? Some manufacturers make pre-rinse units that only just meet the EPAct standard of 1.6 gallons per minute. Fisher's model flows at 1.15 gallons per minute at 60 psi, and the valve from CHG flows at 1.2 gallons per minute. The new T&S B-0107-C blows them all away with its amazingly low 0.65 gallons per minute, offering a savings of 100,000 gallons a year over a valve that merely meets EPAct standards.

Enjoy top-quality T&S construction, our outstanding service support, a spray valve designed to beat the strictest of standards, while still delivering powerful performance, and a low, low flow rate of 0.65 gallons per minute. Choose the T&S B-0107-C Spray Valve and watch your savings begin to grow.


Copy and paste the embed code above.

Learn all about the super low flow T&S Brass B-0107C super low flow pre-rinse spray valve! This high performance low flow spray valve could save you hundreds of dollars per year in water costs.

T&S Brass Low Flow Pre Rinse Spray Valve vs. Aerator Spray Valve

T&S Brass Low Flow Pre Rinse Spray Valve vs. Aerator Spray Valve

Here's an easy way to save water and save money at the same time. Replace your current spray valves and aerators with T&S low flow models. Watch this 15 second test comparing the T&S low flow spray valve, using only .6 gallons per minute, versus a spray valve. It's easy to see how you can save as much as 77,000 gallons per year. That's over $200 in water savings, or $2,300 in water, sewer, and heating savings combined. And here's the same test using faucets. The tube on the left is filled by a T&S low flow aerator - the tube on the right with a standard faucet. We filled these tubes for just 15 seconds, and it's easy to see the dramatic difference. What about over a year's time? You could easily waste hundreds of thousands of gallons each year, and that's money down the drain. So save water, and save money, by using T&S water conserving, low flow spray valves and aerators.

Copy and paste the embed code above.

Learn how T&S Brass Low Flow pre rinse spray valves and aerators can help save your business thousands throughout the year.

Customer questions about this product

How hot can the water that I use with this unit be?
This faucet has a maximum operating temperature of 140 degrees Fahrenheit.
Ask your own question!

Details

The T&S B-0107-C ultimate low-flow pre-rinse spray valve is designed to deliver the consistent flow you need with the water savings you desire. The only low-flow pre-rinse spray valve endorsed by the Green Restaurant Association, the B-0107-C uses 0.65 GPM, considerably less than the federal limit of 1.6 GPM.

Using this low-flow valve can save up to 100,000 gallons of water per year! Its fan jet style spray pattern delivers a concentrated stream of water to clean your dishes more thoroughly before they go into your dishwasher. These cleaner dishes also mean you won't have to dump and fill your wash water as often, saving even more energy and water!

This low-flow pre-rinse spray valve is 8 7/8" in length with handle and comes with a 3/4" - 14UN male threaded inlet. Please consult the Specification Sheet for additional details and measurements.

Certifications

CSA

Downloads

Spec Sheet Specsheet Manual Manual Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Limited 1-Year Warranty READ THIS LIMITED ONE-YEAR WARRANTY BEFORE INSTALLING OR USING THIS PRODUCT. IF THESE TERMS ARE NOT ACCEPTABLE TO YOU, IMMEDIATELY RETURN THIS PRODUCT TO T&S BRASS AND BRONZE WORKS, INC BEFORE INSTALLING AND/OR USING THIS PRODUCT. T&S Brass nd Bronze Works, Inc. (T&S) warrants to the original purchaser (other than for purposes of resale) of this product that such product is free from defects in workmanship and materials for a period of one year from the original date of purchase. During this one-year warranty period, if this product is found to be defective, T&S shall, at its option, repair and/or replace it. To obtain warranty service, products must be returned to T&S Brass and Bronze Works, Inc., 2 Saddleback Cove, Travelers Rest, South Carolina 29690, clearly marked to the attention of the Warranty Repair Department. Shipping, freight, insurance and other transportation charges of the returned product to T&S and the return of the repaired or replaced product to the purchaser are the responsibility of the purchaser. Replacement and/or repair under this warranty shall be made within a reasonable time after receipt by T&S of the returned product. This warranty does not cover this product if it has received secondary finishing or has been altered or modified after purchase or for defects caused by physical abuse to or misuse of the product, or shipment of the product. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND ANY REMEDY FOR BREACH OF CONTRACT WHICH BUT FOR THIS PROVISION MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE ABOVE ONE-YEAR PERIOD. UNDER NO CIRCUMSTANCES SHALL T&S BRASS BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY LOSS OF USE OF THE PRODUCT OR ANY SPECIAL OR CONSEQUENTIAL COSTS, EXPENSES OR DAMAGES WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT OR OTHERWISE INCURRED BY THE PURCHASER OR ANY OTHER USER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Related Items

Customer Reviews

Overall User Rating: T&S B-0107-C Ultimate Low Flow Pre-Rinse Spray Valve - 0.65 GPM ( 5.0 stars from 1 review )

    Spray valve works GREAT. Low flow uses significantly less water,while the sharp stream still takes a lot of the food off of plates like a pressure washer. I will definetly reorder. Abe Fehr

    from Del Rios Restaurant Posted on

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register