Unassembled high chairs are a great way to save money on shipping! This instructional video will teach you how to assemble your chair from the legs to the crotch strap so you can be sure that the children you serve are safe and comfortable.
Unassembled high chairs are a great way to save some money. The small box makes it very inexpensive to ship and they come with everything you need for assembly in a few easy steps. Putting these chairs together is pretty easy. I did try to do it on the ground but I did find it’s a bit easier to try it from a table. I like to start with the seat right here. Take one of the screws and just hand tighten it to get yourself started. After hand tightening the screws of the seat, the next step is to insert the back piece. It has a little guide peg so it will stay for you so you don’t need to hand tighten the screw. But if you want to that can help as well for some added stability. After tightening that screw, it’s good to take the side down off here. I like to spin it around so the seat is actually facing toward me. Grab the other side here, insert the guide peg, and hand tighten another screw. Finish hand tightening the seat screws and now it’s starting to look like a chair. Next, you’re going to be installing the lap bar. Be careful because this is only going to go in one way. Again, hand tightening screws will help the stability. One of the last steps of the process is going to be to install the support bars. I like to start with the smallest one here. Again, you can use the guide pegs to show you where to put it in. And it will only fit in one way. We’re almost done, you just got to spin the chair around and install the last support bar. At this point, all you have to do is tighten the rest of the screws with the provided Allen wrench. The most confusing part about the assembly of the chair is this little piece right here, the crotch strap. You want to start off by threading the strap around the middle bar. Pull the plastic piece the whole way down and then wrap the strap around the bar. Next, thread it back thru the middle and back out the front. That way you can easily pull it tight and keep your baby safe. So as you can see these chairs are cheap to ship. They are very simple to assemble and you can slide them right up to your standard restaurant table. As always if you have any questions, we’d love to talk to you so please feel free to log onto our live chat.
The crotch strap to a high chair is a must have for keeping toddlers safe at your restaurant. When these begin to wear out or fray, they become unsafe. Check out this video and see just how easy it is to replace your high chair crotch strap.
The crotch strap to a high chair is a must have for keeping toddlers safe at your restaurant. These straps wear out and fray over time, making them unsafe. Replacing them is a breeze. Simply detach the old strap from the bottom of the high chair. Next, remove the safety bar so you can slide the old strap off of the bar. Once you have successfully detached the safety bar and discarded the old crotch strap, you can slide the new strap onto the bar. Flip the high chair over to staple the new crotch strap onto the bottom of the seat. Regularly replacing your high chair crotch straps will prevent accidents, and create a safe and clean environment. If you have any questions, please feel free to use our live chat button.
The seatbelt for the high chair is an additional safety feature to ensure a secure seat for your smallest patrons. Replacing your high chair seatbelts often will keep your high chairs safe and sanitary.
The seatbelt for the high chair is an additional safety feature to ensure a secure seat for your smallest patrons. Over time, the seatbelts will begin to wear out and become less sanitary. Replacing them is a breeze. Flip the high chair over and detach the old seatbelt from the bottom of the high chair. Next, feed your new seatbelt through the high chair and line each end up. Now, you can secure both ends of your new seatbelt to the seat. Regularly replacing your high chair seatbelts will prevent accidents and create a safe and clean environment. If you have any questions, please feel free to use our live chat button.
Make sure your most important patrons are secure at mealtime with this Royal Industries ROY 700 N stacking wooden high chair with natural finish. This restaurant high chair features radius corners to avoid chipping. It is made of solid, 3/4" hardwood and is stackable for space-saving, easy storage. Fitting flush to standard table heights, it also features nylon floor glides to protect your floors from scratches and scuffing. A nylon seat belt and crotch strap are included to keep little ones safe. This stacking wooden high chair ships unassembled, saving you money on shipping costs.
Length: 19 3/4"
Width: 18 1/2"
Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date,
please note this in the comment section while checking out! Please feel free to log on to our Live Chat should you have any questions
before placing your order. After your order is placed, we will update you via email to let you know how this will be shipping to you.