$39.99/Each
Ships free with PlusCustomers Also Viewed
Product Overview
- 3 5/8" cast spout with .5 GPM aerator
- 4" centers, 1/2" NPS inlets
- Deck mounted base, attractive chrome-plated brass construction
- 120 degree maximum water temperature
- Single lever handle for effortless temperature control
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 2 lb.
- Spout Length
- 3 5/8 Inches
- Faucet Height
- 5 9/16 Inches
- Faucet Centers
- 4 Inches
- Features
- California AB100 Compliant NSF/ANSI 372 NSF/ANSI 61
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 2 Inches
- Spout Type
- Cast
- Temperature Rating
- 120 Degrees Fahrenheit
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
What parts do I need to install my new faucet?
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!
Details
This Regency cast spout faucet is a perfect addition to any restroom installation, with a familiar and intuitive design, and a classic look that complements a wide range of sinks and design aesthetics. The faucet features a 3 5/8" long cast spout with a .5 GPM aerator, providing plenty of space for hand washing while also creating a gentle flow pattern for minimal splashing. The single lever handle design also makes it easy for guests to get a comfortable water temperature without adjusting multiple handles. With a set of 1/2" NPS inlets on 4" centers, it's easy to install this faucet onto your sink deck or countertop too, while the chrome-plated brass finish makes it a great fit for a wide range of restroom designs.
Overall Dimensions:
Spout Length: 3 5/8"
Faucet Height: 5 9/16"
NSF/ANSI 61 & 372
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat software