$23,321.33/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- Solid state thermostat temperature controls with melt cycle
- Hinged wire mesh submerger screen with safety grid handles
- Cooks up to 80 donuts per hour
- Field reversible drainboard doubles as tank cover
- High-temperature baffles provide maximum heating and combustion efficiency
- Stainless steel construction
- Natural gas; 72,000 BTU
- 1/2 hp filtration system pumps up to 5 gallons per minute
- Quantity
- 1/Each
- Shipping Weight
- 510 lb.
- Width
- 29 1/2 Inches
- Depth
- 43 1/4 Inches
- Height
- 57 Inches
- Fry Pot Width
- 24 Inches
- Width (with drainboard)
- 57 1/2 Inches
- Fry Pot Depth
- 24 Inches
- Amps
- 0.5 Amp
- Hertz
- 60 Hertz
- Phase
- 1 Phase
- Voltage
- 115 Volts
- Burner Style
- Tube
- Cabinet
- Stainless Steel
- Features
- Built-In Filtration System Drainboard Made in America NSF Listed
- Gas Connection Size
- 1/2 Inches
- Number of Fry Pots
- 1 Fry Pot
- Oil Capacity
- 100 - 117 lb.
- Plug Type
- NEMA 5-15P
- Power Type
- Natural Gas
- Split Pot
- Without Split Pot
- Total BTU
- 72,000 BTU
- Type
- Donut Fryers
Customer questions about this product
Is this cooking equipment available in all 50 states?
Due to energy regulations this cooking equipment is not available in all 50 states.
My business is at a high elevation; does this change anything when I order gas cooking equipment?
Many gas equipment manufacturers need to make adjustments to the equipment so it operates correctly at elevations over 2,000 feet. Sometimes we can special order from the manufacturer and have your cooking equipment delivered ready-to-go, but in cases where your unit is in stock and waiting to ship, you’ll need to have a qualified service technician come to your location and alter your unit at the time of installation so that it is compatible with a higher elevation. Contact our Special Orders team prior to placing your order, and we will let you know what will work best for the equipment you are planning to purchase.
Pitco 24RUFM-SSTC NAT Details
Perfect for frying large loads of donuts and other specialty foods, this Pitco 24R-UFM-SSTC natural gas donut floor fryer is ideal for stadiums, casinos, correctional facilities, and more. Thanks to an oil capacity of 100-117 lb., this fryer can cook up to 80 dozen donuts per hour. To help fry a wide variety of tasty products, the unit comes with a hinged submerger screen with safety handles for holding products below the shortening surface, two donut turner sticks, two nickel-plated mesh screens, and a removable drainboard that doubles as a fryer cover. It can be attached to the unit's left or right side and serves as an additional draining option for your freshly fried donuts.
A standing pilot light provides users with a ready flame when heat is required, while long-lasting, high-temperature alloy stainless steel baffles offer maximum heating and combustion efficiency. Solid state thermostat controls automatically maintain a temperature between 200 and 400 degrees Fahrenheit, allowing for an effortless frying experience. Additionally, a deep cool zone and removable wire mesh tube screen allow users to remove burnt particles and crumbs, preventing a major cause of fat breakdown.
Designed with user safety in mind, a built-in gas control valve works as a pressure regulator to prevent gas leaks or spills that could harm the operator. It also will cut off gas flow to the main burner until the pilot is established, in addition to shutting off all flow completely if the flame were to go out. A temperature limit switch will also shut off gas flow if the fryer were to exceed its upper limit. Both the unit's tank and cabinet feature durable stainless steel construction and the fryer is mounted on four 6" adjustable legs. A bottom 1 1/4" full port drain valve is built-in and the unit comes with a drain extension and drain line clean-out rod for quick cleaning.
Overall Dimensions:
Left to Right (without drainboard): 29 1/2"
Left to Right (with drainboard): 57 1/2"
Front to Back: 43 1/4"
Height: 57"
Frying Area: 24" x 24"
Capacity: 100-117 lb.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
Made in America
This item was made in the United States of America.
CE Listed
This product complies with the standards imposed by Conformance European (CE).
5-15P
This unit comes with a NEMA 5-15P plug.
CSA Design, US
This item has been certified by the Canadian Standards Association (CSA) to meet applicable certification requirements for gas-fired products used in the United States.
CSA Blue Flame, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for gas-fired products in Canada.
1/2" Gas Connection
This unit comes with a 1/2" gas connection to be installed by a professional.
Need Parts & Accessories?
Show replacement parts and accessories for Pitco 24RUFM-SSTC NAT today!
Resources and Downloads for
Pitco 24RUFM-SSTC NAT
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
Please note that this item is subject to a 12% Export Infringement Administration fee for all orders shipping outside of the U.S. and Canada with the exception of Guam. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.