|
This MirOil HOD 1050 fryer oil filter
machine is hand crank operated and
designed for use with fryers with up to 105
lb capacities. This oil filter machine is
designed for use for fryers with drain
valves, because it is a one-way pumping
machine. Fryers drain into the filter
machine
and then the oil must be hand cranked to
pump the oil back into the fryer. This hand
operated pump can move 30 lbs of oil a
minute. The unit does have 8"wheels, so it
can easily be transported from fryer to fryer
or out of the way. This unit can be safely
used to transport hot oil due to its 8"
wheels and its rugged, stainless oil basin
with a removable, hinged safety splash lid
to provide safety while transporting oil.
This oil filter machine takes the FM1812B
filter bag found under item# 581FM1812B,
sold separately. It is an EZ Flow filter, so it
can filter safely at bath water temperatures
(10 degrees Fahrenheit above room
temperature), but is able to filter at frying
temperatures. It is great for heavy crumb
loads. This HOD 1050 does come with the
frame to hold the filter bag that is built into
the filter machine. There is no need to
purchase a filter frame/holder. Eliminate
crumbs in your fryer oil by filtering with
this hand operated filter machine. It's
extremely easy and will make a big
difference in the product you produce for
your customers. You can rinse and reuse
these oil filter bags. The filter up to 1000
uses or for 6
months.
Just remember to rinse the filter after each
use so that the oil doesn't harden and clog
the filter.
The dimensions of this oil filter machine
are: 43" (handle height), 12" (front drain pot
height), 11.5" (side width), 32" (length), and
16" (back width).
To save money by making your oil last
longer, check out the Fry Powder we carry
from MirOil. Fry Powder adds antioxidants
to the oil that prevent breakdown reactions.
It is a great investment, because the cost
of oil is continuing to rise. Check out the
three different packaging combinations of
Fry Powder that we offer under item#
581L106, 581P100, and 581P36B.
About Common Carrier Shipments:
We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
|
