$2,343.91/Each

Add to cart or login. (You can remove it at any time.)

Why do we do this?

  • Full-height design with contemporary styling
  • 24 gauge galvanized steel interior and exterior
  • One auto-close triple pane glass door with hold-open feature
  • Fully customized temperature control between 34 and 41 degrees Fahrenheit
  • 2" foamed-in-place urethane insulation and double row LED lighting
  • Uses R-134A refrigerant; 1/5 hp compressor
  • Includes four adjustable heavy-duty epoxy-coated cantilever shelves

UPC Code:

400010489428

Condition:

New
Shipping:

Usually Ships in 9-10 Business Days

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Master-Bilt Glass Door Merchandisers

Master-Bilt Glass Door Merchandisers

Hi, I'm Chris Bennett, Technical Service Manager for Master-Bilt. Today I'd like to discuss some things with you that will help optimize the performance and operations of your glass door merchandiser. First and foremost, the #1 thing that needs to be done is to clean the condenser coil, this will increase the performance and also efficiency. The front grill is attached by four screws—one in each corner. I will demonstrate now how to take those out with just a regular Philips head screwdriver. Once you've removed the front grill, your condenser coil will then be exposed. Power to the case should be off at this point in time. Typically, you can do the cleaning with just an ordinary brush, by rubbing the dirt, lint, and debris down and away from the coil. You want to be sure to brush the debris down from the coil as the intake is on this side, so you want to pull the debris out. Once you've cleaned your condenser coil, re-install the front grill, and be sure to put the screws back as well. The next thing to check for is the adjustment of your doors to make sure they self-close properly. As you can see, this door does not self-close. That can be easily adjusted by the adjustment at the bottom of the door. To do this, all you need is a flat-head screwdriver, and turn the screw counterclockwise until the door closes. Once the door closes, make an additional turn and a half to ensure the door will close when it is opened. Now the door operates properly. Another occurrence that happens from time to time through normal use is the door may begin to sag. That can also be taken care of by using a flat-head screwdriver and adjusting the adjustment screw on the inside of the door. It should also be turned counter-clockwise to make this correction. Another check to make, is to make sure your gasket is not damaged or torn by either stocking or purchasing from customers. To do this, just rub over with your hand to make sure there's no tear marks. If you want to change the temperature to better suit your needs. That is easily done on this electronic control by pressing the "I" button to display the set point and then by pressing the up or down button to your desired temperature. Releasing the "I" button will then automatically set the temperature. Another thing that you will very likely want to do is give your case a general cleaning. This can be done with a general purpose glass cleaner for the glass doors as well as the painted panels. Last but not least, you'll need to do a visual inspection of the evaporator coils located inside your case. From time to time, stickers or paper maybe become stuck to the fan guard. At that point in time, just remove the stickers or paper to help increase the air flow. After that, just use a flashlight to inspect the coils to see if they are dirty. If it does happen to be dirty, this cleaning should be performed by a service technician. For technical assistance, there's a 1-800 number listed on the top left of your cabinet, it will also tell the model number and the serial number of the case. Please have these numbers ready once you make the call. Thank you for viewing today's video, we hope that is was very informational. If additional assistance is needed, please dial 1-800-684-8988 and one of our technical service representatives will be glad to assist you.

Copy and paste the embed code above.

Master-Bilt's line of glass door merchandisers are easy to own and operate. Check out this video for tips on how to customize the case for the needs of your particular business and how to perform regular upkeep that ensures long-lasting performance.

Master-Bilt Reach-In Merchandisers: Adjusting Door Tension

Master-Bilt Reach-In Merchandisers: Adjusting Door Tension

One of the common problems that occurs with glass reach-in door cabinets is an issue with door tensioning. Sometimes in shipping, doors can lose their tension. It's important at setup to check all the doors to make sure they have proper tension. Even after they've been in place for some time, if you start getting reports of doors that are standing open or especially if you have icing on the evaporator coils, it's difficult to diagnose. It can very well be caused by something like this. If you close one of the doors of a cabinet, especially a 3 or 4 door cabinet, it will cause one of the tension doors to pop open and relieve the compressed air pressure. You can see that this door has no tension. It will not close. If it stands open long enough, it's going to pull in humid air and create coil icing. The key here is to set tension on this little device at the bottom of the hinge side of the door. You see, with a flat blade screwdriver, we can adjust tension and we want to adjust until that door starts to move and actually closes. Once you get the door to self close from that open position by, in this case turning counter-clockwise, give it about another turn and then test the setting by pulling the door open 6 inches and releasing. If the door will self close on a well-leveled cabinet from 6 inches of open, it has got sufficient tension. You don't want to over tension because that shortens the life of door tensioning rod or can cause it to break.

Copy and paste the embed code above.

Ensure your Master-Bilt reach-in merchandiser doors have sufficient tension by following these easy steps!

Specs
Width 30 Inches
Depth 30 Inches
Height 79 Inches
Interior Width 26 1/2 Inches
Interior Height 62 Inches
Amps 4.5 Amps
Hertz 60
Phase 1
Voltage 115
Access Type Doors
Capacity 25 cu. ft.
Color White
Compressor Location Bottom Mounted
Door Style Swing
Door Type Glass
Energy Star Qualified Yes
Features LED Lighting
Hinge Location Left
Horsepower 1/5 HP
Installation Type Freestanding
Made in America Yes
Number of Doors 1
Number of Shelves 4
Pass-Through No
Sections 1
Split Doors No
Temperature Range 34 - 41 Degrees F

Details

Perfect for displaying the most popular frozen items at your convenience store, market, or deli, this Master Bilt BMG-27-HGP bottom mounted swing glass door merchandiser refrigerator is an essential piece of equipment for boosting impulse sales and purchases. The unit's full-height design and triple pane glass doors allow for maximum product visibility and storage, while the contemporary white exterior with white interior provides an attractive product showcase.

A 24 gauge painted and textured galvanized steel interior and exterior add extended durability. The floor is also constructed of stainless steel, both of which help protect the self-contained, bottom mount refrigeration system. A single full-size door boasts a 90 degree hold-open and auto-close feature to increase convenience while simultaneously conserving energy. For further ease of use, a total of four adjustable heavy-duty epoxy-coated cantilever shelves come with price tag molding built-in.

The unit uses R-134A refrigerant and has an interior that is insulated with 2" foamed-in-place "zero ODP" urethane, ensuring your food items remain between 34 and 41 degrees Fahrenheit. Double row LED lighting, adjustable legs for leveling, and an easy-access electronic thermostat combine to ensure the unit is one that's perfectly customized for your operation and ideal for displaying all different types of food items. Other features include heavy-duty universal workflow handles, easily replaceable snap-in magnetic vinyl door gaskets, and a top-mounted, low profile interior evaporator housing.

The Master Bilt BMG-27-HGP merchandiser refrigerator requires a 115V electrical connection.

Overall Dimensions:
Width: 30"
Depth: 30"
Height: 79"

Interior Dimensions:
Width: 26 1/2"
Height: 62"
Capacity: 25 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order once it is placed.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products

merchandiser refrigerator