Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 12 1/8" long swing nozzle with 2.2 GPM aerator
  • 1 lever handle; ceramic cartridge
  • 3/8" male threaded inlet
  • 3/8" female threaded riser outlet (to pre-rinse)
UPC Code:400013527165

T&S Brass and Bronze Works 5AFL12A Specs

Quantity
1/Each
Shipping Weight
2.55 lb.
Spout Length
12 1/8 Inches
Spout Height
9 7/8 Inches
Features
ADA Compliant
Finish
Chrome
Flow Rate
2.2 GPM
Material
Brass
Spout Clearance
7 3/8 Inches
Spout Type
Swing
Type
Add-On Faucets

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

Ask your own question!

T&S Brass and Bronze Works 5AFL12A Details

Your pre-rinse faucet is a versatile tool, but sometimes you need a normal faucet to get the job done - that's where this Equip by T&S 5AFL12A pre-rinse add-on faucet comes in! Designed to fit Equip pre-rinse units, this add-on faucet features a 12 1/8" long swing spout to help you deliver water exactly where you need it, and it comes with a 2.2 GPM aerator that gently mixes air into the stream as it exits the faucet, creating a soft flow with minimal splashing.

A single lever handle controls the water flow on this faucet, while the ceramic cartridge design delivers maximum leak protection. This innovative design uses ceramic discs to actuate the water flow, in place of the many moving parts and O-rings found in a standard compression cartridge assembly. Because these discs are much more durable than soft rubber parts and they create the same, quality seal that you expect, this drastically improves faucet reliability. It connects to the pre-rinse unit with a 3/8" threaded riser (male at bottom, female at top).

Overall Dimensions:
Spout Length: 12 1/8"
Spout Height: 9 7/8"
Spout Clearance: 7 3/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

Need Parts & Accessories?

Show replacement parts and accessories for T&S Brass and Bronze Works 5AFL12A today!

Resources and Downloads for
T&S Brass and Bronze Works 5AFL12A

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

3 Compatible Models