$164.49/Each
Ships free with PlusProduct Overview
- Durable, cast brass construction and polished chrome finish
- Pressure compensating Econo-Flo laminar spray; releases water at 0.5 GPM
- External, thermostatic mixing valve maintains a moderate water temperature
- Vandal-proof 4 1/4” lever handle is color coded for easy identification
- Single hole for deck mounting
- Quantity
- 1/Each
- Shipping Weight
- 4.17 lb.
- Spout Length
- 4 1/2 Inches
- Faucet Width
- 2 3/8 Inches
- Faucet Height
- 6 Inches
- Faucet Centers
- Single
- Features
- ADA Compliant Flex Inlets Included
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 2 3/4 Inches
- Spout Type
- Cast
- Temperature Rating
- 180 Degrees Fahrenheit
- Type
- Faucets
- Water Inlet Size
- 3/8 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Chicago Faucet Company 410-T41E2805ABCP Details
Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets deck-mounted single-hole manual sink faucet. This unit is equipped with a pressure compensating, Econo-Flo non-aerating laminar spray that releases a clear, non-splashing flow of water at 0.5 GPM. This unit has a rated operating pressure of 20 to 125 PSI. It has a hot inlet temperature of 100 to 180 degrees Fahrenheit, a maximum output temperature of 107 degrees Fahrenheit, and a minimum approved flow rate for temperature limiting of 0.35 GPM.
This faucet includes an external, thermostatic mixing valve to maintain a moderate water temperature. The hot and cold, vandal-proof 4 1/4" lever handle is color coded for easy identification. This model has a single hole for deck mounting, and it uses 1/2" NPSM supply inlets and a coupling nut suitable for 3/8" or 1/2" risers. To cover unused mounting holes, 4" and 8" accessory plates are available for purchase.
Overall Dimensions:
Spout Length: 4 1/2"
Faucet Height: 6"
Faucet Width: 2 3/8"
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
ICC-ES Low Lead NSF/ANSI 372
This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.
ICC-ES Drinking Water NSF/ANSI 61, Section 9
This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.
3/8" Water Connection
This unit comes with a 3/8" water connection for water supply.
Resources and Downloads for
Chicago Faucet Company 410-T41E2805ABCP
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources