Other Available Finishes:

  • Includes CO2 tank (ships empty), regulator, drip tray, and tap
  • Holds a 1/2 barrel keg
  • Attractive chrome guard rail
  • 40 to 50 degree temperature range
  • Stainless steel finish
  • Refrigeration system with R134a refrigerant
  • 115V; NEMA 5-15P plug
  • ETL and UL Listed
Ships via Common Carrier
Usually Ships in 1 Business Day
When will I receive my item?
MFR Item:

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

Avantco Kegerators

Avantco Kegerators

Our Avancto Kegerators are the perfect way to refrigerate and dispense your half barrel kegs. They're ideal for caterers and small banquet halls. These beer dispensers come equipped with a single tap tower as well as a CO2 tank and regulator to keep your favorite brews flowing. Foam insulation will help cool beer down to a refreshing 32 degrees. Each kegerator will hold one standard half barrel keg. Avantco Kegerators are available in two finishes: a black, painted steel exterior, or a shiny, stainless steel door version. Both versions have an attractive chrome guard rail to hold glasses on the top of the kegerator to keep glassware from falling and breaking. To avoid spills, a drip tray collects runoff from overfilled glasses and faucet drips. Thanks to a simple pull-release handle, it's easy to control the amount of beer poured. The kegerator tap tower is tall enough to fit glasses of all sizes, even pitchers! A shiny pour spout makes for an attractive presentation. Your kegerators arrive with all the parts and hardware you need to set them up for use. Each kegerator includes an empty CO2 tank that you can easily fill at a local supplier or hardware store. We provide you with a CO2 regulator to monitor pressure levels, making it easy to tell when you need to refill the tank. Once you've set up your kegerators, it's easy to transport them thanks to 4 included caster wheels. Two wheels are equipped with brakes to help keep the unit in place. A 5-foot cord and NEMA 5-15 plug are included, so all you have to do is plug it in. Avantco Kegerators also include 2 adjustable shelves to keep contents organized, including your favorite bottled beers. A control knob inside the fridge allows you to easily adjust temperatures to high, medium and low for a 32 to 50 degree range. Each kegerator's swing door has a stay open feature for easy product loading. A sealed gasket helps keep heat out. Please refer to your kegerator manual when installing your CO2 tank. We also recommend that you purchase a beer tap line cleaning brush to keep your keg connection running smoothly. Thanks for watching, and if you have any questions please click on our live chat button!

Copy and paste the embed code above.

Watch this video to learn about all the great features of the Avantco kegerator, and see why it’s perfectly suited for your catered event or venue! From initial setup to refilling your CO2 tank, see how to properly operate and use your kegerator!

How to Assemble an Avantco Kegerator

How to Assemble an Avantco Kegerator

Assembling the Avantco kegerator is easy. Here’s how: To install the casters, first tilt the unit on its side, setting a cardboard or cloth down so as not to scratch it. Insert the casters into the holes in the bottom of the unit, removing plastic if necessary, and turn the heads of the bolts clockwise with a wrench. Two of the casters have locking mechanisms, so install those in the front of the unit. Once done, tilt the kegerator back upright. It’s very important to not plug the unit back in until it’s been upright for at least eight hours to allow for the refrigerant to stabilize after being on its side. Next, install the guardrail. Install the CO2 gas line tube to the regulator by attaching one end of the tube to the hose barb connection on the CO2 regulator. Insert the special washer into the regulator’s cylinder attachment nut. Attach a CO2 regulator to the CO2 cylinder by screwing the regulator nut into the cylinder valve and tighten. Wrap the rubber strap around the CO2 bottle to secure the bottle in place. Position the cylinder so that you are able to read the numbers of the gauges and have easy access to the shutoff valve. When connecting the beer line, it is very important that the black rubber washer be installed inside the wing nut before connecting the beer line to the tap. Remove the black rubber protective cap, located on the top of the tap, and screw on the wing nut with the rubber washer. Tighten it firmly by hand. Attach a CO2 line in to the tube to the hose connection on the tap. Make sure the beer tower faucet is closed before connecting the tap to the keg. To secure the tank connection, pull the tapping handle out and push down until it locks into position. Now just put the keg into the kegerator, screw the handle on the tap if you haven’t done so already, peel the protective coating off the unit, and enjoy. Thank you for watching and if you have any questions, please use our live chat button.

Copy and paste the embed code above.

Watch this video to see a step by step tutorial on assembling your Avantco kegerator so you can begin using it for your parties, events, and fundraisers! Check out how easy it is to set up, and get started today!

Width 21 3/8 Inches
Depth 26 7/8 Inches
Height 33 1/4 Inches
Amps 1.9 Amps
Hertz 60
Phase 1
Voltage 115 Volts
Capacity 6 Cubic Feet
Compressor Rear Mounted
Door Style Swing
Door Type Solid
Exterior Finish Stainless Steel
Number of Doors 1
Number of Draft Arms 1
Number of Kegs 1
Style 1/2 Barrel
Temperature Range 40 - 50 Degrees F
Type Kegerators / Beer Dispensers


Serve up one frosty brew after another with the Avantco ZPJ-170T stainless steel / black single keg beer dispenser! Ideal for use at parties, fundraising events, and more, this unit features an 11 3/4" high, 2 1/2" diameter tower with a single tap. The included CO2 tank and CO2 regulator give you everything you need to keep the beer flowing for the duration of your event! Foamed in place insulation and a powerful yet efficient refrigeration system ensure that your beer stays at the optimum serving temperature, while its plastic liner interior is easy to wipe down. The included drip tray, stainless steel door, and silver, painted steel exterior look great and are easy to clean.

Four 3" casters (two with brakes) allow you to easily move the unit from one location to another, and permit easy cleaning underneath. This model is ETL and UL Listed and comes with a 5' cord and NEMA 5-15P plug. Please consult the Specification Sheet for additional details and installation requirements.

Overall Dimensions:
Left to Right: 21 3/8"
Front to Back: 26 7/8"
Height (including casters): 33 1/4"
Volume: 6 cu. ft.

Interior Dimensions:
Left to Right: 17 5/16"
Front to Back: 16 1/2"
Height: 27 5/16"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.


UL US & Canadian ETL US & Canadian



Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register