2.5 Gallon Noble Chemical Sierra Acrylic Floor Finish 2 / CS

2.5 Gallon Noble Chemical Sierra Acrylic Floor Finish 2 / CS

MSDS

Instructions

Warranty

Noble Chemical's Sierra Acrylic Floor Finish is a metal cross- linked finish, with high initial gloss and durability with exceptional responsiveness to spray buffing. A true workhorse in any maintenance program. Sold two, 2.5 gallon containers per case.

Directions for Use:
Preparation: If stripping is necessary, use a high quality product and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow to dry completely.

Finishing: Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Two or three coats are desired initially, depending on the condition of the floor and gloss desired.

Maintenance: The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.

This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.

Due to US DOT regulations, this product is ineligible for expedited air shipping.