Other Available Voltages:

  • Holds 14 lb. of product; 64 lb. of oil
  • Performs 20 - 30 cycles without filtration
  • 240V, 3 Phase, 10.5 kW



Special Order

Some items on our website are not normally stocked in our warehouses. These items are marked "Special Order" underneath the price on the item's page.

Please understand that Special Order items may not be able to ship within 1 business day like our regularly-stocked items.Some may be shipped directly from the manufacturer. Others might have to be ordered into our warehouse with the next order from that manufacturer and then shipped to you; this could take up to several weeks.

As a result, we urge you to contact us if you have questions about the delivery time of a Special Order item you wish to order.

Please note - we are not always able to cancel special order items once the order is placed. These items may also be non-returnable. Please contact us if you have any questions before ordering this item.

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

View All Items
Winston Collectramatic: Locating the Serial Number

Winston Collectramatic: Locating the Serial Number

In this video, we will review the locations of the serial tags on a Winston 8000 Series Collectramatic fryer. You will require a Phillips head screwdriver to access all of the serial tag locations. The first serial sticker is located in the bottom left hand corner of the fryer's front panel. This sticker lists the model and serial number assigned to the fryer. This sticker also provides additional information such as the fryer's voltage, the amp rating, and the pressure rating on low and high pressure fryers. A second identical serial sticker is located on the interior of the fryer. To access this serial tag, move the right hand panel on the back of the fryer. Once the panel has been removed, the sticker should be visible on the right side panel of the interior. The additional serial number is engraved on the rim of the fryer's pot.

Copy and paste the embed code above.

This video explains how to locate the serial number on your Winston 8000 series Collectramatic fryer. You can find the number in 3 different areas.

Winston Collectramatic: Startup

Winston Collectramatic: Startup

Lightly lubricate the gasket for the lid and place it with the seam facing to the back where the lid hinge is located. Avoid overstretching when assembling and removing. Lightly lubricate the gasket for the collector and place at the bottom of the fryer and seat in place. With the stir tool, stamp down to be sure it is firmly seated. Be sure the dead weight and vent back are in place before putting the muffler on the back of the fryer. Push down the muffler with the palm of one hand while putting it into place with the other, and then secure it into place. Be sure the drain valve is closed with the handle in the up and back position. If you have a high-efficiency fryer, you would install the vent and dead weight in the back by inserting the weight in the vent tube with the half-open side at the top, then, sitting the weight inside the pressure-hole and securing the tube around the O-rings. Fill the fryer with shortening. 68 pounds per 30.9 kilos per 6-head fryer, or to just slightly below the max-fill line. Allow for expansion as the shortening heats. Before starting your Winston Collectramatic fryer, you must configure your control settings to either high-efficiency fryer or pressure fryer. To get into your settings, press program, then the up arrow twice, then the down arrow twice. When your control says Prog, press the number 8 channel. It will display PrCF, then press enter. Choose between 6-head or 4-head, depending on your fryer, by using the up and down arrow keys. Then, press enter. Next, select the option to pressure cook or open fry by using the up and down arrow keys. Then, press enter. Select your bird size, whether it's 2.75 pounds or 2.5 pounds by using the up and down arrow keys. Then, press enter. Last, you will have the option of changing your temperature read out to Fahrenheit or centigrade by using the up and down arrow keys. Then, press enter. To program a channel, you must first select a channel and press program, then up twice and down twice. When your display says Prog, press enter and confirm Pc 1 by pressing channel 1 and enter. H1 will display. Use the up and down arrow keys to choose the first temperature setting of the cooking process. Then, press enter. T1 will display. Using the up and down arrow keys, adjust your first cook time of the program and also your total time. Then, press enter. Next, use the up and down arrow keys to select either P or O for pressure cooking or open fry cooking. Then, press enter. Use the up and down arrow keys for temperature, time, and open or pressure settings during each set-point. Be sure to press the enter key after each setting. After setting your initial drop set-point for H1, your Collectramatic fryer will allow you to adjust temperatures and times for 6 different stages throughout the cook cycle. When setting the timing for each stage, your selected time will represent the timing left in the cook cycle. At any point you may select a time of 00 to cancel all remaining stages. On your last set-point, set your time to 0 so the program is saved to your channel. To confirm settings and set-points, press the check cycle button. Only preform the deep stir at the beginning of the day. Throughout the day, you may stir between batches, but only down to the collector collar. Continue process 2 or 3 more times until a drop message displays. Then, feel the bottom of the collector to see if it is hot. Put the heat plate in place on the bottom of the collector wearing gloves and using your basket hook. It is essential for the heat plate to be in place for optimal performance. When ready to cook, drop the basket carefully into the oil using the gloves and the basket hook. Close the lid and secure the handle bars into the lid lock block. Be sure the handles lock into place and then press the desired program. Once the alarm sounds, press the channel button, and then wearing gloves, depress the lid lock to vent the fryer completely. Lift the lid and immediately wipe off excess moisture with a dry towel. Pull the basket up and stand it to allow the product to drain. Between drops, it is important to scrape down the inside of the cooker with a spatula and use a Teflon brush to scrape the heating elements. This will promote better shortening quality. Before daily cleaning, it is important to ensure that the fryer is turned off. Remove the muffler. It should be emptied, cleaned, and dried. Next, remove the dead weight and the vent back and clean and dry them as well. The outside of the unit may be cleaned with towels and a light kitchen cleaner. Never use abrasives or spray water on the outside of the fryer. Gaskets should be removed without overstretching, washed in warm, soapy water, and stored in the refrigerator in cold, clean water. Proper daily rotation of gaskets will extend their life. Wearing gloves and using the basket hook, remove the heat plate. Place a filter on the lid with the holes side up on the fryer plate and align the holes. Then, fold under the excess filter paper, still keeping the holes aligned. Slide the clamp over the filter plate and align the filter pipe with the holes in the paper. Tighten the wing nuts. To install the filter into the tank, lightly lubricate the gaskets on the intake and the outtake tubes. Connect the filter tube to the left side and secure in place. Connect the wand assembly insert to the right side. Be sure all connections are secure. Place the filtration unit under the drain valve and open the drain, allowing the shortening to fill the unit. Close the drain valve and while wearing gloves and keeping the wand assembly firmly in hand, turn on the filtration unit and rinse the inside of the cook pot with the hot shortening. You should continue to use a Teflon brush and a spatula to scrape the inside of the cook pot to remove particles. Once you have cleaned the inside of the pot, drain the oil and use the displacement tool to remove as much shortening as possible. Using the basket hook, remove the collector. It should then be emptied, washed, and dried thoroughly. Put a clean, lubricated gasket on the collector. Put the collector on the bottom of the fryer and seat it firmly in place with the stir tool. Once cleaning is complete, close the drain valve and refill the cook pot. Disconnect the wand and hose assembly and hold upright and drain into the shortening tank to remove excess shortening and prevent clogging in the hose. Disconnect the intake tube and secure all the quick disconnects. Then, run the filter pump for 3 to 5 seconds to remove excess shortening from the filtration pump to remove clogging. Never use water to clean out the pump. Periodically, you will want to do a detailed cleaning of the lid. Remove the lid from the fryer and turn upside down on a table. Unscrew the retainer from the lid lock to disassemble. All parts, except the lid valve, may be cleaned with warm, soapy water and dried. The lid valve should be wiped with a clean cloth. Lubricate the O-ring on the lid valve with vegetable oil. Then, reassemble the lid as shown.

Copy and paste the embed code above.

Assemble and clean your Winston Collectramatic by following these steps! Thorough cleanings help prolong the life of your fryer and its parts.

Winston Industries Inc. OF49C 240/3 Specs
Width 20 1/4 Inches
Depth 28 3/4 Inches
Height 45 1/2 Inches
Amps 25.2 Amps
Hertz 60 Hertz
Phase 3
Voltage 240
Wattage 10.5 Kilowatts
Burner Style Open Pot
Cabinet Stainless Steel
Capacity 64 lb.
Features Programmable Controls
Made in America Yes
Number of Fry Baskets 1
Number of Fry Pots 1
Power Type Electric
Split Pot No
Type Electric Floor Fryers

Customer questions about this product

Are there any additional shipping fees associated with this Winston Industries item?
Any Winston Industries product shipping outside of the United States may be subject to additional fees. Please contact Customer Solutions for more information prior to placing your order.
Ask your own question!

Winston Industries Inc. OF49C 240/3 Details

The Winston Industries OF49C Collectramatic 64 lb. floor fryer is the perfect way to fry up French fries, chicken, fish, and more with maximum efficiency! This fryer can go 20 - 30 cook cycles at a time without filtration, extending shortening life and ensuring that you spend more time frying up customer favorites, not changing the oil. Its easy to use microprocessor controls allow you to choose from 8 channels, 6 temperatures, and plenty of time settings, and they will never require calibration for accuracy. A durable stainless steel frame ensures years of reliable use.

- 4 head; 14 lb. of product, 64 lb. of oil

- 8 channel microprocessor controls; "Flex-Time" for varying sized products and shortening management system

- Stainless steel frame

- Comes with: (1) clamshell basket, (2) collector gaskets, (2) lid gaskets, (1) spatula, (1) drain hook, (1) heat plate, (1) Teflon® brush

- 1 1/2" insulation around cooking vessel

- 4 adjustable legs

- It requires a 240V, 3 phase electrical connection

Overall Dimensions:
Left to Right: 20 1/4"
Front to Back: 28 3/4"
Height: 45 1/2"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • UL Canada

    UL Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in Canada.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • Hardwired


    This product must be hardwired; it does not plug into a standard wall outlet.

Resources and Downloads for
Winston Industries Inc. OF49C 240/3

Spec Sheet Specsheet Manual Manual Warranty Warranty School Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register