Ships free with Plus

  • Teflon® coated hot plate prevents sticking
  • 115V, 750 watt



Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Wrap and store items easily with this Winholt WHSS-1 single roll film wrapping machine.

Keep meats, vegetables, side dishes, and other food items fresh with this film wrapper machine. Ideal for supermarkets, delis, or back-of-house restaurant use, it accepts a roll of plastic wrap up to 18" long. Plus its stainless steel and aluminum construction gives it outstanding durability for every day use. This machine requires a 115V electrical connection.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • 5-15P


    This unit comes with a NEMA 5-15P plug.

Great Capacity

With the ability to hold a single roll of plastic wrap up to 18" long with an 8" diameter and 3" core, you'll be able to wrap products with minimal interruptions. You can slide the end caps in to accommodate smaller rolls for effortless dispensing.

Teflon®-Coated Hot Plate

The spacious 6" x 15" Teflon®-coated hot plate gives you ample space to wrap products. Plus, you won't have to waste time cleaning up afterwards, as its designed to prevent sticking. It's heated too, providing dependable warmth for effortless sealing.

Simple Controls

All it takes to start working is the quick flip of a toggle switch. Simply adjust the thermostat knob, allow it to preheat for 5-10 minutes, and this machine is ready to wrap!

Watch More Videos

Win-Holt Wrapping Machine Demonstration

Want to know how to wrap your cheeses, meets, and vegetables? Use this Win-Holt technique and seal in freshness!

Keep your cheeses, meats, and vegetables fresh with this Win-Holt wrapping technique! Simply place the foam tray in the middle of the work surface. Then, grab the plastic film wrap, pull it over the foam tray, and tuck the excess underneath or around the tray. You can then pull the foam tray toward the heated cut-off rod to cut the wrap. After it is cut, tuck in any excess that is left and place the tray right on the hot plate to seal the package. You can use this technique to cover any tray and seal in freshness!

Copy and paste the embed code above.

Win-Holt Wrapping Machine Setup

Set up your Win-Holt wrapping machine with these step-by-step instructions! After following these steps, you can simply plug in and begin using your new machine.

Welcome to this video on your assembly and operating instructions for your new Win-Holt film wrapper! Upon receiving your Win-Holt film wrapper, be sure to visually inspect the box thoroughly. You want to make sure that there isn't any shipping damage that could have occurred while it was in transit. Now that we've inspected our box and I haven't found any obvious damage, let's go ahead and open the box and review the contents to be sure that everything was shipped to us properly. Be sure to use reasonable care and safety when opening up the box. You don't want to damage the contents inside the box or cause personal injury. Now that I've removed the product from the box, I'm going to remove the clear plastic wrap and locate the manual in order to start setting up. Your Win-Holt film wrapper should include everything that you see pictured here. Should anything that is pictured here not be included in your box, contact customer support at www.winholt.com. Let's begin the assembly of your Win-Holt film wrapper by referencing the Film Wrapper Technical Bulletin. This bulletin is filled with great information that will make your setup fast and easy. Our first step is to attach the lower baring blocks onto the back side of the unit. Remove the hex nut and bolt, place the baring block, line it up with the holes in the back, place the bolt through, and replace the hex nut. Repeat this process on both sides and tighten them firmly by hand. You can then use an adjustable wrench to tighten them just a little more to make sure you have the appropriate tension. Repeat the process on the other side to ensure that the left and right baring blocks are assembled firmly. Loosen the wing nuts on both the right and left baring block, and then rotate the top to expose film roll axle slot. Our next step is to insert the film onto the film axle rod. The film axle rod allows for different widths of film to be used on the same unit. Locate your pin end cap and remove the pin to reveal the center where the film axle rod will be inserted. Insert the film axle rod into the pin end cap to the desired depth of your film roll and then push the pin into the rod hole. This will secure the pin end cap to the film axle rod. Insert the film axle rod into the cardboard core of the film roll and ensure that the pin end cap fits snugly up against the cardboard of the film roll. Screw the wing end cap onto the film axle rod, so that the wing end cap fits snugly up against the cardboard core of the film roll. Place the axle and film into the baring blocks and swing the upper baring block back into place. Then, tighten and adjust the wing nuts for desired tension. Repeat the process on the other side and adjust the wing nuts for tension once again. While that takes care of the setup and assembly of your unit, the next part of this video will explain the basic operations of your Win-Holt film wrapper. In this next step, we are going to outline how to prepare the film roll for our film wrap machine. You can see the film roll, work surface, support rod, cut off rod, hot plate area, and the adjustable thermostat. Let's begin by rolling the film underneath the work surface. Replace the work surface flap, grab the film and pull it underneath the support rod. However, make sure that it is over top the cut off rod. Once it is fed through the rod, simply pull to ensure that you have enough of the film to start working. You can now plug it in, turn it on, and set the hot plate temperature using the thermostat on the side.

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Width: 22 1/4 Inches
  • Depth: 24 Inches
  • Height: 5 Inches

Resources and Downloads for
Winholt WHSS-1

Spec Sheet Specsheet Winholt Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Winholt WHSS-1 Single Roll Film Wrapping Machine - 115V

    5.0 stars from 3 reviews


    People Talk About:

    price doubles different deli Definitely counter competetion cheeses carry buy

    Great counter-top wrapper. There are a lot of different brands on the market and this one is superb with an unbeatable price. Definitely the one to buy

    from NFI Posted on

    We love this item. It saves so much time wrapping our deli items - plus ensures the freshness of our lunchmeat, sausages and cheeses !

    Posted on

    This has taken us to the next level in packaging. A lot less expensive than the competetion that just put's it in their own labeled box and doubles the price. Webstaurant does not carry the film that goes with it, need to order from your paper supplier

    from Iacofano's Posted on

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register