WEBVTT

1
00:00:00.600 --> 00:00:04.440
<v 0>Follow these steps to connect your smart dispenser to VersaHub.</v>

2
00:00:04.770 --> 00:00:06.390
If you are new to VersaHub,

3
00:00:06.540 --> 00:00:10.410
please view our onboarding video to set up your VersaHub platform.

4
00:00:11.070 --> 00:00:13.380
Once you're on the dispenser setup page,

5
00:00:13.530 --> 00:00:17.340
select "Continue to Dashboard." On your mobile device,

6
00:00:17.370 --> 00:00:20.040
select the menu icon and tap "Add."

7
00:00:22.020 --> 00:00:26.430
Select "Equipment" and then select the type of dispenser you would like to add.

8
00:00:27.030 --> 00:00:29.010
Now you will register your unit.

9
00:00:29.340 --> 00:00:33.720
Enter the "Serial Number" and then the 7-character DUID

10
00:00:33.780 --> 00:00:37.140
located on the sticker inside the dispenser's cover.

11
00:00:37.530 --> 00:00:39.870
To connect your dispenser to WiFi,

12
00:00:39.990 --> 00:00:44.460
open your dispenser and hold the "sync/Setup" button for three seconds.

13
00:00:44.820 --> 00:00:46.410
Once it's ready to connect,

14
00:00:46.710 --> 00:00:49.950
you'll see a solid red light and hear a long beat.

15
00:00:50.310 --> 00:00:54.120
Check the box indicating that you've seen the red light. Now,

16
00:00:54.120 --> 00:00:58.260
we're going to connect your dispenser to WiFi. On your mobile device,

17
00:00:58.290 --> 00:01:03.210
go to your WiFi settings and connect to the VersaHub network.
Once

18
00:01:03.210 --> 00:01:07.770
connected, a pop-up will appear. Follow the instructions carefully.

19
00:01:08.010 --> 00:01:11.340
Select the WiFi network you want to connect your device to.

20
00:01:12.030 --> 00:01:16.830
Make sure your device is placed in a location with a strong WiFi signal (four

21
00:01:16.830 --> 00:01:21.240
bars or more). Check the box indicating the signal strength.

22
00:01:21.630 --> 00:01:25.650
Enter your WiFi password and press connect. Next,

23
00:01:25.740 --> 00:01:29.580
check the box indicating that you've connected your equipment to WiFi.

24
00:01:30.060 --> 00:01:31.890
If your connection is successful,

25
00:01:32.100 --> 00:01:36.210
you'll see a red light on your dispenser blank four times and hear four short

26
00:01:36.210 --> 00:01:37.650
beeps. If not,

27
00:01:37.740 --> 00:01:41.940
you'll see a red light on your dispenser blink two times and hear two short

28
00:01:41.940 --> 00:01:46.470
beeps. Check the box indicating that you've heard four short beeps and press

29
00:01:46.470 --> 00:01:49.200
"Continue." Your dispenser is ready.

30
00:01:49.560 --> 00:01:53.250
You can add another unit or view your VersaHub dashboard.

31
00:01:54.060 --> 00:01:56.640
To learn more about how to set up your equipment,

32
00:01:56.880 --> 00:02:01.170
watch more videos at www.VersaHub.com.