WEBVTT

1
00:00:07.290 --> 00:00:11.130
<v 0>Adding drawers to your stainless steel work tables will add storage and utility</v>

2
00:00:11.130 --> 00:00:13.860
to your kitchen workstations. In this video,

3
00:00:13.860 --> 00:00:17.730
we'll show you how to install these Regency drawers, it's really pretty simple.

4
00:00:18.180 --> 00:00:20.580
It's easiest to work with just at the top of the table.

5
00:00:20.610 --> 00:00:23.250
So if you bought your table in drawers at the same time,

6
00:00:23.580 --> 00:00:26.130
install the drawers before you assemble the table.

7
00:00:26.790 --> 00:00:28.830
If you're mounting drawers to an existing table,

8
00:00:29.040 --> 00:00:33.300
you can easily remove the tabletop by using an Allen wrench to unscrew the legs

9
00:00:33.300 --> 00:00:36.390
from the tabletops gussets, and then lifting it off.

10
00:00:36.510 --> 00:00:38.550
It's best to have a helper when you're doing this.

11
00:00:39.330 --> 00:00:42.690
Set the tabletop upside down on a surface that won't scratch it,

12
00:00:42.960 --> 00:00:45.330
and then you can begin assembling your drawer.

13
00:00:46.170 --> 00:00:49.110
Today we're using Regency stainless steel drawers,

14
00:00:49.200 --> 00:00:50.790
so if you have a different brand,

15
00:00:50.850 --> 00:00:55.290
just make sure you double-check the manufacturer's instructions. Among the pieces

16
00:00:55.290 --> 00:00:56.640
that come in your drawer kit,

17
00:00:56.880 --> 00:01:00.990
there are two Z brackets and a bag of nuts and bolts.
You'll use these nuts and

18
00:01:00.990 --> 00:01:03.840
bolts to attach the Z brackets to the top of the frame,

19
00:01:04.170 --> 00:01:08.070
making sure that the top of the bracket goes outward and the bracket extends a

20
00:01:08.070 --> 00:01:11.940
bit further back than the rear of the frame. Once you've done this,

21
00:01:11.940 --> 00:01:14.340
flip the drawer and align it where you'd like to mount it.

22
00:01:14.760 --> 00:01:18.660
It's a good idea to try this once with a drawer in the frame so that you can

23
00:01:18.660 --> 00:01:22.110
test and make sure that the door will clear the lip of the table. Now,

24
00:01:22.110 --> 00:01:22.830
if it doesn't,

25
00:01:22.830 --> 00:01:26.880
you'll need to shim with some nuts between the hat channel and the Z brackets.

26
00:01:27.060 --> 00:01:30.390
One of the things that you'll notice is that this part of the Z bracket has no

27
00:01:30.420 --> 00:01:31.253
holes.

28
00:01:31.260 --> 00:01:35.040
This is because the hatch channels can be aligned in all sorts of ways depending

29
00:01:35.040 --> 00:01:36.600
on the manufacturer of the table.

30
00:01:36.870 --> 00:01:40.410
You'll need to drill holes in the brackets and then the hat channels,

31
00:01:40.740 --> 00:01:45.150
and then just use self-tapping sheet metal screws to attach the drawer to the

32
00:01:45.150 --> 00:01:47.160
table. Now we're almost done.

33
00:01:47.220 --> 00:01:51.420
It's just a matter of reattaching the tabletop to the legs, and placing the pan

34
00:01:51.420 --> 00:01:56.340
inside the drawer. See that? Adding storage for your utensils is quick and easy.