WEBVTT

1
00:00:00.210 --> 00:00:04.530
<v 0>How to assemble your Regency wire shelves.</v>

2
00:00:04.530 --> 00:00:08.400
First, insert foot levelers into the post by twisting them clockwise.

3
00:00:09.000 --> 00:00:12.210
For mobile units, push the casters into the posts.

4
00:00:12.420 --> 00:00:15.750
Pushing in the casters may take a bit of force. Next,

5
00:00:15.810 --> 00:00:19.890
snap the four split sleeves onto each post for the bottom shelf,

6
00:00:19.980 --> 00:00:22.950
ensuring the arrows on the sleeves are facing up.

7
00:00:23.550 --> 00:00:27.480
Then hold the bottom shelf on its side as you slide each post through the

8
00:00:27.480 --> 00:00:31.440
collars and the shelf until the sleeves fit firmly inside them.

9
00:00:31.770 --> 00:00:35.190
Stand the unit upright and ensure the shelf is secured.

10
00:00:35.820 --> 00:00:38.940
Add additional split sleeves at the desired shelf height.

11
00:00:39.150 --> 00:00:42.630
Continue to place the remaining shelves on the top of the post.

12
00:00:42.750 --> 00:00:47.340
Sliding them through the shelf collars until the sleeves fit firmly. 

13
00:00:47.340 --> 00:00:50.790
Finally, screw the foot levelers in or out to level the entire unit.

14
00:00:51.390 --> 00:00:53.280
Now your assembly is complete.