WEBVTT

1
00:00:00.720 --> 00:00:03.180
<v 0>Handle replacement, be it a roll dome handle,</v>

2
00:00:03.270 --> 00:00:06.210
a crash bar, or a push handle is all the same.

3
00:00:07.230 --> 00:00:10.860
The bolts are always inserted from the inside. Okay,

4
00:00:10.920 --> 00:00:12.990
so if you look in here,

5
00:00:12.990 --> 00:00:17.640
you'll see the bolt coming through the back end behind the stainless into the

6
00:00:17.640 --> 00:00:21.180
handle. Follow the end of the handle and you'll find the bolt.

7
00:00:22.200 --> 00:00:25.920
Seven-sixteenth wrench or a socket to remove the fastener.

8
00:00:26.310 --> 00:00:30.270
Very simple on the other side. Loose from that.

9
00:00:34.500 --> 00:00:38.670
Voila. Handle's off. Okay. Replacement is in reverse order.

10
00:00:38.940 --> 00:00:42.330
A new handle will come with new hardware. Place it over the holes.

11
00:00:43.110 --> 00:00:47.160
The bolt and lock washer as shown.

12
00:00:51.900 --> 00:00:52.733
<v 1>Start it by hand,</v>

13
00:00:58.380 --> 00:00:59.213
finish it with wrench.

14
00:01:15.810 --> 00:01:16.050
Voila.