WEBVTT

1
00:00:01.140 --> 00:00:01.980
<v 0>Badge replacement.</v>

2
00:00:02.940 --> 00:00:06.690
The Crown Verity badge is held on with three spring clips from the inside,

3
00:00:07.320 --> 00:00:11.580
and for TV, we've left two off. To remove the last one there

4
00:00:11.580 --> 00:00:14.850
just get yourself a flat screwdriver and pry these clips off.

5
00:00:16.350 --> 00:00:19.770
If your unit is at all aged, they come right off.

6
00:00:21.030 --> 00:00:24.750
Your new badge will come with the three brand-new clips ready to go.

7
00:00:25.440 --> 00:00:30.390
Just install the badge in the three holes. Again, open the roll dome.

8
00:00:30.960 --> 00:00:34.740
And from inside, start that clip by hand.

9
00:00:36.030 --> 00:00:39.240
Put all three on here. Two,

10
00:00:41.340 --> 00:00:44.970
three. And we need to seat those clips,

11
00:00:45.780 --> 00:00:48.810
and the best tool for that is in my back pocket.

12
00:00:49.740 --> 00:00:53.520
It's a nut driver or just a simple socket. Okay.

13
00:00:53.580 --> 00:00:57.690
Something that's hollow in the center. Line that up like so.

14
00:00:58.770 --> 00:01:02.430
Support the badge here and with our hand push on those clips.

15
00:01:04.680 --> 00:01:08.250
That's all there is to it, badge installed.