WEBVTT

1
00:00:00.240 --> 00:00:04.740
<v 0>How to program a recipe with your Cooking Performance Group countertop electric</v>

2
00:00:04.740 --> 00:00:09.510
convection oven. First, turn on the unit. Press the cookbook button.

3
00:00:09.690 --> 00:00:14.580
The display will show "P01" indicating program number one.

4
00:00:15.030 --> 00:00:18.750
Use the up and down buttons to select your desired program.

5
00:00:19.170 --> 00:00:23.970
If "Program" is flashing, there are no saved recipes for that program.

6
00:00:24.330 --> 00:00:27.690
A steady light means a recipe is already saved.

7
00:00:28.050 --> 00:00:31.920
To delete a program, when it is displayed in the list of programs,

8
00:00:31.920 --> 00:00:34.860
you long-press the temperature and time buttons.

9
00:00:35.100 --> 00:00:39.000
The program displayed is permanently deleted, so it becomes empty,

10
00:00:39.000 --> 00:00:43.350
and the number will start flashing. Next, choose a recipe program.

11
00:00:43.830 --> 00:00:47.460
Press the cookbook button again to confirm your selection.

12
00:00:48.000 --> 00:00:51.240
You can set up to 99 programmed recipes.

13
00:00:51.690 --> 00:00:55.920
Press the temperature button and adjust the temperature using the up and down

14
00:00:55.920 --> 00:00:59.970
buttons. Press the temperature button again to save your selection.

15
00:01:00.540 --> 00:01:05.340
Repeat this process to set and save the desired amount of time 

16
00:01:05.340 --> 00:01:06.173
and the level of humidity.

17
00:01:07.500 --> 00:01:11.130
Press the cooking cycle to program up to three stages of cooking.

18
00:01:11.550 --> 00:01:15.750
You can select temperature, time, and humidity for each stage.

19
00:01:16.080 --> 00:01:19.380
Press and hold the cookbook button to save your recipe.

20
00:01:19.710 --> 00:01:24.150
The display will show "STO" to confirm that the recipe has been

21
00:01:24.150 --> 00:01:27.540
stored. Finally, press the Start/Stop button.

22
00:01:27.900 --> 00:01:32.340
The display will show "PRE" and the unit will 

23
00:01:32.340 --> 00:01:33.030
automatically begin preheating.

