$9,448.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

Accessories & Options

Shipping: Usually Ships in 2 Business Days

You May Also Need

Kolpak Walk-In Refrigeration

Kolpak Walk-In Refrigeration

Keep your cold foods at proper holding temperatures with Kolpak walk-in refrigerators! Boasting air shields that resist warm air infiltration, Arctic Fox cooling controllers, and energy-efficient LED lights, these refrigerators can reduce energy usage by up to 50%. Plus, they have adjustable hinges, hydraulic actuated door closures, and heavy-duty doors to provide maximum cold holding performance with minimal environmental impact.

Copy and paste the embed code above.

Learn how you can save money and energy with Kolpak walk-in refrigerators!

Kolpak: Basic Walk-In Installation

Kolpak: Basic Walk-In Installation

Basic walk-in installation. General safety information. First, i'll start with some general safety information. -Installation, maintenance, and servicing are to be performed only by trained and qualified personnel familiar with commercial walk-in products. -Ensure that all fields wiring conforms to the equipment requirements and all applicable local and national codes. -Disconnect all power sources before servicing the unit. -Sheet metal and coil surfaces have sharp edges. - Use appropriate protective gloves to prevent injury. -Use appropriate eye protection during installation and servicing. Receiving Inspection: Carefully inspect for any concealed damage. Report any shortages or damages to the carrier. Not on the bill and file a claim. Panel Identification: Kolpak uses a panel identification system. A similar drawing is shipped with each walk-in and is located in the small parts box. Each panel is labeled to aid in identification of proper placement. Panel item #s are references in the product assembly drawing, showing proper placement for intended installation within the unit. Using the packing list and skid documentation, count the wall panels, corners, ceilings, doors, and floors where applicable. Locate and verify the accessory hardware package. Site Preparation: Part of a successful installation is ensuring that the area is clear of all debris before beginning assembly. If care is not taken to ensure a level base, wall, and ceiling valve, it will not align properly, causing problems in install and operation of door panel, and potentially performance issues due to excessive air leaks. Floor Panel Installation: Review the floor panel layout on the assembly drawing. Panels are labeled with numbers corresponding to those on the assembly drawing. Lay out four panels in correct sequence, according to assembly drawings, and making sure the floor is level. Lock floor panels together, making sure the edges are flush and square. Wall Panel Installation: Review the wall panel and floor section layout on the assembly drawing. Start with the back corner and work around the unit both ways, ending with a front corner. Begin wall panel assembly by cam-locking a back corner panel and one wall panel together. Work around the unit in both directions, ending at opposite corners. Ensure the edges and tops of walls are flush. Screed Installation: Standard screeds are available in both vinyl and metal versions. Walk-ins with screeds have tubes of butyl included in the small parts box. Apply two beads of non-drying butyl on the bottom side of the screws. Secure the screw to the floor using supply fasteners. This video only shows the procedure for installing one screed. Follow the same steps for all remaining screeds. Ceiling Panel Installation: To begin ceiling panel installation, use the assembly drawings for correct panel placement and sequence. Begin with an in-section for a single compartment enclosure, or a T panel for a multi-compartment enclosure. Place ceiling panels in position per the assembly drawings on top of the wall panels . Do not lock ceiling panels to the walls at this time. Then check the panel alignment. Cam lock the ceiling panels together, and after several ceilings panels are in position and locked together check all wall to ceiling drawings for flush fit and proper alignment. Then lock the ceiling panels to the wall panels. Door Section Installation: We will next review the door section installation. It's important to keep the door section locked to prevent the door from opening while handling. This will prevent any safety concerns for those handling it as well as damaging the door. Check the door section with a level to ensure it will closer properly for a tight seal. After all wall panels and door sections are assembled, lock them into the floor screen. Ensure that all remaining wall, floor, and ceiling panel locks are engaged prior to adding plug buttons. Plug Button Installation: Remove protective covering from panels if applied. Check that all cam lock are engaged. Insert plug buttons into the cam lock wrench access holes and firmly tap in place using a rubber mallet. Plug buttons supplied for wall and ceilings are vinyl. Plug buttons supplied for floors are either stainless steel or high-strength plastic.

Copy and paste the embed code above.

Watch this video to see how to install your Kolpak walk-in. step by step!

Kolpak QSX6-1208-CT-R Specs
Width 139 Inches
Depth 93 Inches
Height 75 3/4 Inches
Door Width 26 Inches
Door Height 66 Inches
Height (with refrigeration unit) 95 1/2 Inches
Amps 16.8 Amps
Hertz 60 Hertz
Phase 1 Phase
Voltage 115 Volts
Capacity 455 cu. ft.
Compressor Location Top Mounted
Door Style Swing
Door Type Solid
Horsepower 3/4 HP
Made in America Yes
NSF Listed Yes
Refrigerant Type R-448A
Temperature Range 38 Degrees F
Usage Indoor
With Floor No

Customer questions about this product

My city or state has special requirements for walk-in refrigeration - what do I need to know before purchasing this item?
Chicago residents: Chicago residents are required to install a pressure relief valve in their walk-in cooler. If you are installing in Chicago, please contact Special Orders prior to making your purchase.

Oregon residents: The state of Oregon charges a tagging fee for inbound shipments of this item. You will be contacted regarding this fee after placing your order.

If you have any questions, please contact Special Orders prior to making your purchase.
How much clearance is necessary to install this walk-in unit?
For best results, there must be 18" of vertical clearance above the refrigeration unit for top mount units, and 2’ of clearance for side mount units for proper ventilation. Failure to do so may result in overheating.
Where is the door located on this Kolpak walk-in?
On a standard unit, the door will be located on the panel that is listed first in the product dimensions. For example, a 10' x 8' x 7' walk-in will come with the door located on the 10' panel. A 5' x 4' x 6' walk-in will come with the door on the 5' panel. Each panel is made up of smaller sections. The door is fitted onto a 46 1/2" section that can be moved to another panel in the field, as long as it is swapped out with a section of the same 46 1/2" width. In order for the door to be moved, the walk-in must also include a floor.
Can I order an outdoor Walk-in unit?
Kolpak Outdoor Walk-ins require a quote from our special orders team. Please contact us at [email protected]
When I order this product, can I request liftgate delivery?
This item is too large and heavy for a liftgate. It can be delivered with a truck-level loading dock or forklift. Contact our Customer Solutions team prior to placing your order if you would like to discuss other delivery options.
Ask your own question!

Kolpak QSX6-1208-CT-R Details

Keep bulk quantities of your refrigerated goods chilled to food safe temperatures with this Kolpak QSX6-128-CT Polar Pak walk-in cooler! The self-contained 3/4 hp refrigeration system is mounted flush to the ceiling so that you can use 100% of your unit's interior for maximum space-saving efficiency. The system is extremely simple to install and features an automatic condensate evaporator to eliminate the need for a drain line and other plumbing, saving you money on the services of a plumber or refrigeration technician. It uses R-448A refrigerant to maintain a temperature of 38 degrees Fahrenheit.

The 26 gauge stucco embossed galvalume steel panels snap together with ease and boast Posi-Loc fasteners to provide you with a perfect airtight fit. Inside the panels is 4" thick CFC-free urethane insulation that not only helps the cooler operate efficiently and maintain consistent temperatures, but also helps give it exceptional structural integrity! The floorless design comes with vinyl screeds for an easy installation and tight seal that allows you to install this model on a ground-contact concrete floor. This provides you with enhanced structural support over similar units with aluminum floors, making it great for situations where heavy shelving or fully-loaded carts will be used.

Workers can easily access the cooler's contents through the 26" wide door that boasts adjustable spring loaded hinges and a durable, ergonomic handle. The door has integrated heater for added protection against condensation, while a safety release is also included inside the unit to prevent accidental entrapment. A 2 1/2" dial thermometer is mounted on the cooler's exterior for simple temperature monitoring, while the interior is illuminated by a vapor-proof interior light for easy product identification. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 139"
Depth: 93"
Height (without refrigeration unit): 75 3/4"
Height (with refrigeration unit): 95 1/2"
Capacity: 455 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents: Prop 65 Warning

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register