• Holds up to (43) standard 3 gallon ice cream cans
  • Standard electronic controls
  • 208V

UPC Code:




Usually Ships in 3-4 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Smaller items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Master-Bilt Ice Cream Hardening Cabinets

Master-Bilt Ice Cream Hardening Cabinets

Hi, I'm Chris Bennett, Technical Service Manager for Master-Bilt. Today I would like to discuss a few things that will help the efficiency and operations of your ice cream hardening case. One periodic check that can be easily done is taking your hand and going along the outer edge of the door to make sure there's no air leaking through the gasket. Go all the way around the door—each side and along the bottom, and then the top as well. After doing that, you can open the door, fully exposing the gasket, then you can look for any tears or abnormalities in the gasket. Also, when the door closes, you should hear it make the seal. This particular model is also equipped with an inner-door which will help with the efficiency. You also want to make sure that they are operating as they should and closing properly. There's a magnet on the inner of the door that connects that is supposed to close the door. As you can see, this one is working perfectly. This particular case has a wide range of operating temperatures. It can be operated from 0 to -37 degrees. Some store owners feel the need to adjust the temperature to further optimize the performance of their case for their particular needs. This is easily done by adjusting the temperature on the electronic control. It is done by holding the "I" button down until the set point is the same, and it is adjusted by the "up" key or the "down" key. Once the desired set point is reached, you remove your hand from the "I" button and it is now set. A visual inspection of the evaporator coils should be performed as well. You can do this easily with the help of a flashlight. If there is debris found on the fan guards, simply remove the debris and wipe down the fan guards. If the evaporator itself appears to need cleaning, you more than likely need to contact your service technician. And for technical assistance, there's a sticker on the inside of the key with a 1-800 number. It's located on the top left of the case. One of the things you can do is keep your condenser coil clean. On this particular model, the coil is easily accessible from the rear of the cabinet. Cleaning under the coil can easily be done using a normal, everyday brush, and brushing the dirt and debris down and away from the coil. Keep in mind that the unit does need to be off during this process. As the air intake goes through the coil, you'll want to brush the debris out. One procedure that is commonly overlooked during installation is the removal of the shipping blocks that are placed under the compressor. Upon installation, the half-inch nuts need to be loosened and the shipping blocks removed for operation. Thank you for viewing today's video, we hope that is was very informational. If additional assistance is needed, please dial 1-800-684-8988 and one of our technical service members will be glad to assist you.

Copy and paste the embed code above.

Master-Bilt's line of ice cream hardening cases are easy to own and operate. Check out this video for tips on how to customize the case for the needs of your particular business and how to perform regular upkeep that ensures long-lasting performance.

Width 52 Inches
Depth 36 Inches
Height 82 Inches
Amps 11.5 Amps
Hertz 60 Hertz
Phase 1
Voltage 208 Volts
Capacity 34.5 cu. ft.
Compressor Location Top Mounted
Door Style Swing
Door Type Solid
Horsepower 1 1/2 HP
Number of Doors 2
Number of Shelves 8
Sections 2
Temperature Range -40 - 0 Degrees F
Total Container Capacity 43 Cans

Customer questions about this product

Can this item fit through a standard height 80" doorway?
Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Ask your own question!


Harden up to 43 standard 3 gallon cans of freshly made ice cream with this Master Bilt IHC-48 ice cream hardening and holding cabinet! Thanks to its top mounted compressor design, the Master Bilt IHC 48 ice cream hardening and holding cabinet provides even more storage space than comparably sized freezers. It also requires less frequent cleaning and servicing, which helps reduce service costs and down time.

The Master-Bilt IHC-48 features a powerful 1 1/2 hp compressor that uses R404-a refrigerant to maintain temperatures between 0 to -40 degrees Fahrenheit. Its dual self closing doors are designed with a convenient 90 degree hold open feature for easier loading and unloading of ice cream tubs. Four staggered height insulated half doors inside the unit help maintain internal temperatures and enhance the units overall energy efficiency.

Eight heavy duty epoxy coated shelves are included to help you better organize the hardening cabinet's storage space. This Master Bilt IHC48 ice cream hardening / holding cabinet requires a 208V electrical connection.

Overall Dimensions
Width: 52"
Depth: 36"
Height: 82"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • 6-15P


    This unit comes with a NEMA 6-15P plug.

Spec Sheet Specsheet Manual Manual Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register