$288.49/Each

Discounted shipping with Plus

Other Available Colors:

  • Includes table top, base, (4) barstools, and all necessary hardware
  • Choose from a classic cherry or modern black side from the reversible top
  • Cross base plate ensures stability and balance
  • Versatile bar height table
  • For indoor use only; great for pizza shops, cafeterias, delis, and more

Take the guess-work out of selecting complementary tables and barstools by choosing this Lancaster Table & Seating 30" x 30" reversible cherry / black bar height dining set!

This bar height table comes complete with everything you need to quickly and easily assemble a classic 4-top table. From the strong, sturdy cast iron base plate and spider, to the sleek black column and durable laminated table top, this table is an all-in-one addition to any establishment. The versatile 30" x 30" design comfortably seats 4 guests without taking up too much room, making it the perfect choice for any restaurant, pizza shop, or cafeteria! This table comes unassembled to save you on shipping costs. Choose from a set of four sleek black cross back barstools with padded seats or versatile mahogany finish back barstools with wooden or padded seats.

  • Seating Capacity: 2 - 4

    Seating Capacity: 2 - 4

    Two to four people can comfortably sit at this table.

Cherry / Black Table Top

This table comes with a reversible cherry / black table top. Choose cherry for a classic look or black for a modern touch.

Black Vinyl Molding

Black vinyl molding protects it from chipping and scuffing, extending the life of the table while adding a polished presentation.

Easy to Clean

The attractive laminate on either side is easy to clean, requiring no maintenance or special chemicals.

Dependable Table Base

The table's eye-catching table top is accented and supported by the included table base. A 37 1/2" high black powder-coated steel column and rod extends the table top to bar height and is connected to the table top via a black, powder-coated 10" spider attachment. At the base of the table, a 22" x 22" black, powder-coated cross base plate helps to prevent the table from wobbling, ensuring stability and balance. A 12-piece floor glide and screw hardware kit attaches to the base, further assisting in leveling the table while preventing the base from scratching the floor.

Customer Q&A Ask a Question

Does the table top come pre-drilled?
No. Since the tabletop can be installed on a variety of bases, it does not include pre-drilled holes for screws. These must be drilled upon assembly.
Will this item look exactly like the one that's pictured?
This item is either made of wood or designed to mimic the look of natural wood. Because of the natural differences in wood, no two items will look exactly the same. Each item is designed from, or to look like, the same type of wood, but each will have its own unique appearance and wood-grain.

Watch More Videos

Lancaster Table & Seating: How to Assemble a Cross Back Chair

Purchasing unassembled chairs are a great way to save money on shipping! This video guides you step by step on how to assemble your cross back chairs so you can be sure your patrons are safe and comfortable.

How to Assemble a Restaurant Table Base

Before furnishing your bar or restaurant with stylish and sturdy tables, watch this video to learn how to assemble a restaurant table base! Here you'll find the parts and the steps needed for successful assembly.

Lancaster Table & Seating: How to Assemble Cross Back Chairs. Before starting, make sure you have all the required pieces. First, lay the chair on its back so you can easily access the seat portion of the chair. Holing the cushion vertically, align it with the frame and the corresponding holes. There should be four screw holes- one in each approximate corner of the chair. Place one screw in each hole, turning to the right to tighten each and attach the cushion to the frame. Once all four screws are aligned and tightened, setup is complete.

Copy and paste the embed code above.
Assembling your restaurant table base can be done with ease by following a few quick steps! Begin by placing your threaded rod through the hole in the spider, until the end of the rod sits in the top of the spider. Flip this over to then place the column over the threaded rod, and slide it down until it touches the spider. Align the center of the base with the column, and push the end of the threaded rod through the hole in the base. Place the washer and the nut on the threaded rod, and use a wrench to screw the nut into place. When screwing the nut in, make sure that the top of the threaded rod is tight against the spider, which will help to ensure that your base will be stable. Screw the glides into the bottom of the base to finish up the assembly. The first thing you’ll do is to take the threaded rod, and slide it through the hole on the spider. Note that the top of the threaded rod will slip into this indentation on the spider. Next add the column, and turn upside down. Now place the base atop this column, making sure it is properly aligned. Now place the washer and nut on the threaded rod, as you screw the nut, make sure that you can feel that the top of the rod is locked inside the indentation on the spider…you may have to pull up and turn a bit. Tighten the nut, and your base is almost finished. Just screw the glides onto the base and you are done. To mount on the table, just place the base onto the center of the table top, making sure to measure, and attach with screws through the holes in the spider. Thank you for watching, and if you have any questions, please contact us!

Copy and paste the embed code above.
Overall Dimensions:
  • Length: 30"
  • Width: 30"
  • Height: 40 7/8"
  • Tabletop Thickness: 1 1/8"

Resources and Downloads

Instructions Instructions Warranty Warranty Seating Capacity Guide Seating Capacity Guide

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register