$49.99/Case

Ships free with Plus

You must buy a minimum of 1000 due to manufacturer packaging.

Other Available Finishes:

  • Increases security and privacy for hotel guests
  • Eliminates the need for hang tags and is maintenance free
  • Includes 4 message options
  • Message can be changed inside the room without needing to open the door
  • Flip open privacy shutter increases privacy
  • Designed to resist tampering and removal
  • Made from durable metal with a decorative finish
  • Easy to install; replaces existing fisheye door view lens

UPC Code:

667042999008
Shipping:

Usually Ships in 3-4 Business Days

CSL Door View Mananger

CSL Door View Mananger

The CSL door view manager is fast and easy to install. Just watch. In case you didn't get all that, let's break it down step by step. You will need the following tools to install your new door view manager. A Phillips head screwdriver, a small level, 7/8" open end wrench, a CSL provided custom 1/2" to 3/4" drill bit, and a drill. In order to install the door view manager, a 3/4" hole is required in the door. After removing the existing viewer, you may find the need to increase the hole size to 3/4" inch. With the custom drill bit, using the existing hole as a guide, drill a 3/4" hole, taking care to keep the newly sized hole perpendicular to the surface of the door along its entire length. Once the 3/4" hole is created, insert the door view managers outside front side assembly shaft into the hole from the outside of the door. Then, on the inside of the door, position the back stationary plate over the protruding shaft. Notice that the back stationary plate and front stationary plate's shafts are keyed to properly align and seat the two components. The next step is to securely position the front assembly using the provided hex locking nut. Tighten the hex nut until it is finger tight. Once in position, place a small level on the flat area at the top of the back stationary plate to be sure the front and back assemblies are level. Check the front assembly to make sure the message window is in the 12 o'clock position. If desirable, fix the plate permanently in place with a number 6 screw through the special hole in the back stationary plate. tighten the hex nut until the front cover is flush against the door surface, being careful to avoid over tightening the hex nut. Now, slide the inside back message wheel into the protruding shaft, and rotate the back message wheel, allowing it to interconnect with the front message wheel shaft. Finally, place the back cover over the back message wheel with the window at the 10 to 11 o'clock position. Then, rotate clockwise until the cover snaps into place. Using the thumb indentations, rotate the message wheel assuring ease of movement. If the message wheels do not turn easy, the hex nut is too tight. If you ever wish to remove the back cover, insert a 5/64" hex Allen key into the hole located at the 6 o'clock position. Push upward while rotating the cover counter clock wise. That's it! Just a few simple steps and your new CSL door view manager is easily installed.

Copy and paste the embed code above.

Watch this easy, step-by-step instructional video on how to install your brand new CSL door view manager! All you need are a few simple tools and you're ready to go.

Central Specialties Ltd. 444BR-1MWAC Specs
Color Gold
Made in America Yes
Material Metal
Type Door Signs

Central Specialties Ltd. 444BR-1MWAC Details

Eliminate hang tags and key card inserts with this CSL 444BR-1MWAC brass door eye view manager. While hang tags and key card inserts can become lost or damaged over time, this door view manager permanently attaches to hotel doors to provide a lifetime of maintenance free service. Additionally, each door view manager comes with these 4 standards messages: do not disturb, housekeeping in room, late check out, and please service room. The messages can be changed from inside the room too. This increases privacy and security because the message can be changed without needing to open the hotel room door. A flip open privacy shutter on the room side of the door can be lifted up for the guest to see out and will return to covering the peephole to prevent other people from looking into the hotel room.

This door view manager is designed to resist tampering to prevent theft and damage as it is made from durable metal. Furthermore, the door view manager can replace an existing fisheye door view lens that has a 3/4" diameter opening. This ingenious design and durable metal construction makes the door view manager an excellent option for any hotel.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Central Specialties Ltd. 444BR-1MWAC

CSL Door View Manager Spec Specsheet CSL Door View Manager Installation Instructions Instructions Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register