Free Shipping

or enter your email to be instantly sent the price!

Ships free with Plus

Start a Live Chat with a Customer Service rep to receive the price!
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

  • Stainless steel top and front; aluminum ends, back, and interior
  • Double pane, low-E tempered glass door design
  • 2 heavy-duty epoxy-coated steel shelves
  • CFC-free foam insulation helps unit operate in ambient temperatures up to 100 degrees
  • Automatic, energy-saving, non-electric condensate evaporator
  • Environmentally-safe, R-134a refrigerant
  • 5" casters allow movement for easy cleaning
  • 1/4 hp; 115V
Shipping:

Usually Ships in 4 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Beverage Air Undercounters

Beverage Air Undercounters

With compact undercounter refrigeration from Beverage-Air it's easy to maximum your back-of-the-house storage space. The UCR and UCF series boast a wide range of configurations including both refrigerators and freezers available from 20" up to 72". Each unit is below 35" in height too, allowing it to alight with or slide beneath a counter. Plus, both standard and shallow depth units are available to best fit your needs. For reliable performance, each unit is tested to perform in ambient temperatures of 100 degrees Fahrenheit. For durability, each undercounter is built with stainless steel sides, top, and front and features a strong anodized aluminum interior. Adjustable epoxy coated steel shelves are included as well as self closing doors that have snap in magnetic gaskets and a 120 degree stay open feature. These doors are field reversible and also feature cartridge style hinges making them strong enough to withstand downward weight and pressure while preventing the doors from losing their alignment. If you're looking for a storage solution with maximum versatility take advantage of the double stacking option available for select units. This low cost options allows two units to operate while stacked so you can get an ultra space saving solution. Or you can take advantage of additional options with these units such as glass doors, or combination door and drawer models. Plus, Beverage-Air boasts the smallest undercounter units in the industry. The UCR20HC and the UCF20HC are each only 20" high. Undercounter refrigerators and freezers from Beverage-Air deliver outstanding value, optimize storage space, and boost efficiency. And like most Beverage-Air units these undercounter units are proudly made in the USA.

Copy and paste the embed code above.

No matter what your back-of-the-house area looks like, you are sure to find the perfect Beverage-Air undercounter unit to fit your space. Designed with your convenience in mind, these units are meant to last in your busy environment.

Continental Refrigerator: Cleaning the Condenser

Continental Refrigerator: Cleaning the Condenser

Today, we're going to discuss the importance and the procedure of cleaning your condenser coil on your Continental refrigerator or freezer. This is important for many reasons. Firstly, it will conserve energy, cut down on your service costs, and also add life to your compressor. It's always important to disconnect the power to your cabinet before doing any preventive maintenance. The first thing you want to determine is where your condensing unit is located. It could be located on the top of the unit, at the rear of the unit, or on the front. Now what you want to do is located the condensing unit and remove the front grill. Once the grill is removed, you'll see the condensing unit and the condenser coil looks like the radiator in your car and inspect for any dirt or paper. Using a stiff nylon brush, remove any debris in a downward motion and always go in the direction of the fins. Depending on the amount of dirt, you may also want to use a shop-vac and you can also pass a flashlight into the fins to see if you can see through or have any additional blockage. If everything looks good, reattach the grill and start your unit. If further information is needed, consult the operation manual on our website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Conserve energy and cut down on service costs by cleaning the condenser coil on your Continental refrigerator or freezer! This will extend the life of your compressor and keep it running properly.

Continental Refrigerator: Electric Condensate Heater Installation

Continental Refrigerator: Electric Condensate Heater Installation

In this segment, we're going to discuss the installation of the optional electric condensate heater with thermostat to take the place of the non-electric condensate pan that comes standard with your equipment. Electric condensate heater may be needed in high humidity and heavily used applications. It is always important with any piece of Continental equipment that has an open pan opening, that pans be left in the top section at all times. If pans are removed at night and that space is left open, condensation will accumulate and the heat from the kitchen will be drawn into that area and that may be the cause of your excessive condensation. If the electric heater is needed, it's easily installed. Remove the rear back cover, two Phillips screws at the lower section, lift the cover, and set it to the side. It's always important to disconnect the power to any piece of equipment before doing any type of work. Once the rear cover is removed and the power is disconnected, take your electric heater and place it in the same non-electric condensate pan that comes with the unit. Have the heater loose, facing the rear. Place it in the pan and the plastic tubing, make sure it's directed into the pan. You may have to adjust the length of the tubing by trimming it down so the plastic is not touching the electric heating element as this will melt. There's a provision in the lower section and that condensing unit area where the condensing unit plugs into the receptacle. One side is marked condensing unit and one side is marked vaporizer. This would be plugged into the side that's marked vaporizer and the extra, additional cord, you can coil that up and use a wire tie or electrical tape so that it doesn't interfere with the fan, go below the bottom of the box, or lay in the pan. Once that is done and power has been checked, make sure everything is tight, make sure there's no vibrations, and you can reinstall the rear cover. Once the rear cover is reinstalled, you're ready to plug the case in and it's back in operation. If additional information is needed, consult the operation manual or the website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Install your electric condensate heater within your Continental until by following these simple steps! An electric condensate heater is needed for heavily used applications and in high humidity areas.

Continental Refrigeration Thermometer Calibration

Continental Refrigeration Thermometer Calibration

In this segment, we're going to discuss the calibration of your LED digital thermometer on your Continental refrigerator or freezer. It's always important to check the calibration before calling the factory or your supplier for service. This can easily be done by placing an accurate thermometer on the center shelf, closing the door for 10 minutes, and then comparing the inside to the outside. If the two numbers do not meet each other, figure out how many degrees you either need to go up or down and then calibration would be needed at this point. You would go to the top of the thermometer. Hit the right hand center, and you'll see CAL, which stands for calibrate. Hit it a second time and you'll see a number. If you need to increase the temperature on the thermometer, you would go to the upper left hand corner. To decrease, the lower left hand corner. Figure out how many degrees you need to change, push that the number of times, and go back over to the right until you see the desired number that corresponds to the inside. You may have to do this a few times to get it to the proper temperature and once that is achieved, let the temperature settle for another 10 minutes. Do a second check and if everything matches, calibration is complete.In this segment, we're going to discuss the calibration of your dial thermometer on your continental refrigerator or freezer, which is easily done with a small, slotted screwdriver. The most important thing is to make sure that the calibration is correct before you contact the factory or your supplier for any service. If service is need, there's a tag on the inner wall of the refrigerator or freezer with the model and serial number. First, place the thermometer on the center shelf if you know it's accurate and calibrated properly. Close the door and let the temperatures settle down for at least 10 minutes. Once that is achieved, you take the small screwdriver, put it under the bezel of the thermometer, and pry off. Once the cover's removed, take your slotted screwdriver, place it in the center screw of the thermometer, and turn it either to the right or to the left to make it colder or warmer. Once the thermometer is set to the proper temperature, let the box settle for another 10 minutes. If you're happy with the two readings, replace the thermometer bezel cover and you're complete. If additional information is needed, you can consult the website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Calibrate your digital or dial thermometer with these simple steps! Calibration will ensure a perfect internal temperature in your Continental refrigerator or freezer.

Continental Refrigerator SW48-SGD Specs
Width 48 Inches
Depth 31 Inches
Height 35 1/4 Inches
Interior Width 44 Inches
Interior Depth 19 3/8 Inches
Interior Height 26 1/4 Inches
Amps 7.2 Amps
Hertz 60 Hertz
Phase 1
Voltage 115
Access Type Doors
Capacity 13.4 cu. ft.
Compressor Location Rear Mounted
Compressor Style Side / Rear Breathing
Door Style Sliding
Door Type Glass
Features LED Lighting
Horsepower 1/4 HP
Made in America Yes
NSF Listed Yes
Number of Doors 2
Number of Shelves 2
Style Counter Height

Customer questions about this product

How do I know if this unit will fit under or match the height of my ADA-Height counter?
Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.
Ask your own question!

Continental Refrigerator SW48-SGD Details

This Continental Refrigerator SW48-SGD undercounter refrigerator is the perfect way to increase cold storage while also providing more work space for your staff! Great for kitchens where space is at a premium, this compact 48" unit comes with a durable stainless steel top and front, while the back, sides, and interior are made from aluminum. With 13.4 cu. ft. of storage, this unit offers plenty of room to keep cold ingredients and foods and it has 2 heavy-duty, epoxy-coated steel shelves that make it easier to stay organized. Plus, this undercounter refrigerator adds efficiency to your kitchen by keeping cold ingredients close at hand and ready for use!

Boasting 2 double pane, low-E tempered sliding glass doors with LED lighting, this unit provides convenient access to the interior without blocking the aisle, and makes it easy to see the contents at a glance. A powerful 1/4 hp refrigeration system uses R-134a refrigerant to maintain food-safe temperatures in even the hottest of kitchens, up to 100 degrees Fahrenheit ambient temperature. The evaporator coil is also engineered with plasticized fins to prevent corrosion and extend the life of the refrigerator to ensure this unit is a long-lasting addition to your kitchen.

The CFC-free polyurethane insulation helps increase the overall energy efficiency and structural integrity of this unit. A set of 5" casters makes it easy to move for routine cleaning and maintenance. This unit requires a 115V electrical connection. This unit includes an electronic controller with digital display and hi-low alarm.

Overall Dimensions:
Width: 48"
Depth: 31"
Height: 35 1/4"

Interior Dimensions:
Width: 44"
Depth: 19 3/8"
Height: 26 1/4"
Capacity: 13.4 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Continental Refrigerator SW48-SGD

Specsheet Specsheet Manual Manual Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Continental assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register