• Free Shipping!  

or enter your email to be instantly sent the price!

Ships free with Plus

One of our friendly Customer Service reps will be happy to give you the price for this item! Start a Live Chat
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

Accessories & Options

*

  • 43" long with 10" cutting board; extra countertop space
  • Holds (9) 1/6 size food pans; mighty top design
  • Non-recessed food pans allow for a flush mount and make swapping out ingredients easy
  • Stainless steel and aluminum construction; epoxy-coated steel shelf
  • Same depth as your mighty top pizza prep table; can be used in the same row
  • Automatic, non-electric condensate evaporator with easy-to-service condensing unit
  • Self-closing door mechanism with magnetic snap-in gasket
  • 1/4 hp compressor with forced air refrigeration; 115V

Condition:

New
Shipping:

Special Order

Some items on our website are not normally stocked in our warehouses. These items are marked "Special Order" underneath the price on the item's page.

Please understand that Special Order items may not be able to ship within 1 business day like our regularly-stocked items.Some may be shipped directly from the manufacturer. Others might have to be ordered into our warehouse with the next order from that manufacturer and then shipped to you; this could take up to several weeks.

As a result, we urge you to contact us if you have questions about the delivery time of a Special Order item you wish to order.

Please note - we are not always able to cancel special order items once the order is placed. These items may also be non-returnable. Please contact us if you have any questions before ordering this item.

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Continental Refrigerator: CRA Series Sandwich Prep Refrigerators

Continental Refrigerator: CRA Series Sandwich Prep Refrigerators

Innovative designs for your foodservice needs. Over 2000 models and growing. American owned. American operated. A solutions provider. Superior customer service. Continental Refrigerator. CRA base models: Sandwich unit base models are certified under NSF-7 to maintain temperatures in 86 degree Fahrenheit ambient and designed to maintain NSF-7 temperatures in 100 degree Fahrenheit ambient. Flush mount pans. Standard mighty top model, door over compressor, flush mount pans. Pan slides. Two tier drawers. Front breather option. Compressor (left), pans (right). Single over shelf. Double over shelf. Drawer over compressor. Optional drawer section above compressor, holds (3) 1/3 x 6 pans. Flat lid. Legs. Standard, with options. Innovative solutions for your foodservice needs.

Copy and paste the embed code above.

Looking for a reliable and efficient sandwich unit for your foodservice establishment? Check out Continental Refrigerator’s CRA base models! With a wide selection of units, you’ll be sure to find one that suits your needs.

Continental Refrigerator: Electric Condensate Heater Installation

Continental Refrigerator: Electric Condensate Heater Installation

In this segment, we're going to discuss the installation of the optional electric condensate heater with thermostat to take the place of the non-electric condensate pan that comes standard with your equipment. Electric condensate heater may be needed in high humidity and heavily used applications. It is always important with any piece of Continental equipment that has an open pan opening, that pans be left in the top section at all times. If pans are removed at night and that space is left open, condensation will accumulate and the heat from the kitchen will be drawn into that area and that may be the cause of your excessive condensation. If the electric heater is needed, it's easily installed. Remove the rear back cover, two Phillips screws at the lower section, lift the cover, and set it to the side. It's always important to disconnect the power to any piece of equipment before doing any type of work. Once the rear cover is removed and the power is disconnected, take your electric heater and place it in the same non-electric condensate pan that comes with the unit. Have the heater loose, facing the rear. Place it in the pan and the plastic tubing, make sure it's directed into the pan. You may have to adjust the length of the tubing by trimming it down so the plastic is not touching the electric heating element as this will melt. There's a provision in the lower section and that condensing unit area where the condensing unit plugs into the receptacle. One side is marked condensing unit and one side is marked vaporizer. This would be plugged into the side that's marked vaporizer and the extra, additional cord, you can coil that up and use a wire tie or electrical tape so that it doesn't interfere with the fan, go below the bottom of the box, or lay in the pan. Once that is done and power has been checked, make sure everything is tight, make sure there's no vibrations, and you can reinstall the rear cover. Once the rear cover is reinstalled, you're ready to plug the case in and it's back in operation. If additional information is needed, consult the operation manual or the website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Install your electric condensate heater within your Continental until by following these simple steps! An electric condensate heater is needed for heavily used applications and in high humidity areas.

Continental Refrigerator: Replacing a Door Gasket

Continental Refrigerator: Replacing a Door Gasket

In this segment, we're going to discuss the care and the steps needed to replace the door gasket on your Continental refrigerator or freezer. It's very important to maintain your gaskets. On a regular basis, they should be inspected for any wear or tear on the sides or on the top. If needed to clean your gasket, use mild soap with warm water and a soft-bristle brush. If a door gasket is required, contact the factory or your supplier with the model and serial number of the case and that'll determine exactly the part number and the gasket needed. No tools are required to replace the gasket. Grasp the top corner or the door gasket and pull straight out of the retainer. Once the gasket is fully removed from the door, take the new gasket and line up the dart on the gasket with the retainer. Pushing with your thumb, making sure that the dart is in line. Once the gasket is in place, close the door, inspect for any gaps or sealing issues, and that's all that is needed to replace a door gasket on your Continental refrigerator or freezer. If additional information is needed, consult the factory or the operation manual, which can be downloaded on www.continentalrefrigerator.com.

Copy and paste the embed code above.

Maintain the gaskets on your Continental refrigerator and freezers with these simple instructions! By inspecting the gaskets for wear and tear, you can ensure there are no gaps or sealing issues on your units.

Continental Refrigerator: Cleaning the Condenser

Continental Refrigerator: Cleaning the Condenser

Today, we're going to discuss the importance and the procedure of cleaning your condenser coil on your Continental refrigerator or freezer. This is important for many reasons. Firstly, it will conserve energy, cut down on your service costs, and also add life to your compressor. It's always important to disconnect the power to your cabinet before doing any preventive maintenance. The first thing you want to determine is where your condensing unit is located. It could be located on the top of the unit, at the rear of the unit, or on the front. Now what you want to do is located the condensing unit and remove the front grill. Once the grill is removed, you'll see the condensing unit and the condenser coil looks like the radiator in your car and inspect for any dirt or paper. Using a stiff nylon brush, remove any debris in a downward motion and always go in the direction of the fins. Depending on the amount of dirt, you may also want to use a shop-vac and you can also pass a flashlight into the fins to see if you can see through or have any additional blockage. If everything looks good, reattach the grill and start your unit. If further information is needed, consult the operation manual on our website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Conserve energy and cut down on service costs by cleaning the condenser coil on your Continental refrigerator or freezer! This will extend the life of your compressor and keep it running properly.

Continental Refrigeration Sandwich Prep Units

Continental Refrigeration Sandwich Prep Units

Continental Refrigeration gives you innovative designs for your food service needs. With over 2000 models and growing, Continental Refrigeration is American owned and American operated with superior customer service. The Continental Refrigeration sandwich prep units are certified under NSF-7 to maintain temperatures at 86 degrees Fahrenheit ambient and designed to maintain NSF-7 temperatures at 100 degrees Fahrenheit ambient. The standard model comes with flush mount pans. However, there are additional features that you can add to make your sandwich prep unit more advanced. These features include front breathing, pans along the right hand side with a flat lid, two or three tier drawers, a composite board, a crumb catcher, and a rear-mounted cutting board. For storage, you can even add a single or double over shelf. Whether you choose a standard or more advanced sandwich prep unit, these units are sure to offer you innovative solutions for your food service needs!

Copy and paste the embed code above.

Keep premium sandwich ingredients fresh (and your customers happy) with the Continental Refrigeration sandwich prep unit! With temperature controls, flush mount pans, and front breathing circulation, Continental Refrigeration will meet your needs.

Continental Refrigerator: Converting Doors to Drawers on Sandwich and Undercounter Units

Continental Refrigerator: Converting Doors to Drawers on Sandwich and Undercounter Units

Hello, in this segment we’re going to show how to convert your Continental undercounter or sandwich case from a door to a drawer. It’s always recommended to disconnect the power to your cabinet before service or modifications. In this segment you are going to need the following tools: a Phillips screwdriver, or a Philips adapter for the drill, a cordless drill with an eighth inch drill bit, and 6 Philips #8 truss head sheet metal screws as well as a pair of pliers not shown in the video to remove the vertical pilaster strips. Once the power’s been disconnected, open the door and remove the top and bottom hinge screws, set the door to the side, also remove the shelf and the side wall vertical pilaster strips. Take the four hinge screws that you removed, reinsert into the four hinge holes, top and bottom. Your drawer cage assembly will consist of 2 drawers and the cage with the center mullion that holds the drawers. Open the top drawer, slide the locking clip from the slide forward and down the back, and remove the top and bottom drawers and set to the side. Carefully lift up and slide the cage assembly into the door opening. Be sure that the center mullion is flush with the front of the case. Locate the six mounting holes in the cage assembly and take your eighth inch drill and drill into the plastic breaker covers. Insert the 6 Phillips screws into the predrilled mounting holes. Install the top and bottom drawer, locking the slide clip on right and left sides. Open and close the top and bottom drawers making sure they close properly and have a good gasket seal. I hope this information was helpful and if you need additional information, please contact the factory or you can download the operation manuals from our website, www.continentalrefrigerator.com.

Copy and paste the embed code above.

Looking to change the doors on your Continental Refrigerator sandwich or undercounter unit to drawers? Thanks to this helpful video, you can quickly and easily convert your unit to better suit your foodservice needs.

Continental Refrigeration Thermometer Calibration

Continental Refrigeration Thermometer Calibration

In this segment, we're going to discuss the calibration of your LED digital thermometer on your Continental refrigerator or freezer. It's always important to check the calibration before calling the factory or your supplier for service. This can easily be done by placing an accurate thermometer on the center shelf, closing the door for 10 minutes, and then comparing the inside to the outside. If the two numbers do not meet each other, figure out how many degrees you either need to go up or down and then calibration would be needed at this point. You would go to the top of the thermometer. Hit the right hand center, and you'll see CAL, which stands for calibrate. Hit it a second time and you'll see a number. If you need to increase the temperature on the thermometer, you would go to the upper left hand corner. To decrease, the lower left hand corner. Figure out how many degrees you need to change, push that the number of times, and go back over to the right until you see the desired number that corresponds to the inside. You may have to do this a few times to get it to the proper temperature and once that is achieved, let the temperature settle for another 10 minutes. Do a second check and if everything matches, calibration is complete.In this segment, we're going to discuss the calibration of your dial thermometer on your continental refrigerator or freezer, which is easily done with a small, slotted screwdriver. The most important thing is to make sure that the calibration is correct before you contact the factory or your supplier for any service. If service is need, there's a tag on the inner wall of the refrigerator or freezer with the model and serial number. First, place the thermometer on the center shelf if you know it's accurate and calibrated properly. Close the door and let the temperatures settle down for at least 10 minutes. Once that is achieved, you take the small screwdriver, put it under the bezel of the thermometer, and pry off. Once the cover's removed, take your slotted screwdriver, place it in the center screw of the thermometer, and turn it either to the right or to the left to make it colder or warmer. Once the thermometer is set to the proper temperature, let the box settle for another 10 minutes. If you're happy with the two readings, replace the thermometer bezel cover and you're complete. If additional information is needed, you can consult the website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Calibrate your digital or dial thermometer with these simple steps! Calibration will ensure a perfect internal temperature in your Continental refrigerator or freezer.

Continental Refrigerator Flexible Solutions

Continental Refrigerator Flexible Solutions

Continental Refrigerator: Flexible. Period. Different applications, Flexible Solutions. DLG Griddle Stands: Designed to maintain NSF-7 temperatures in 100 degree ambient. Machine edge. Easy glide, fully extendable drawers with built-in safety clips. Drawers hold 6" deep pans side-by-side. Drawers support up to a 250 lb. capacity. Front breathing. Unique forced air design utilizes fans (approx. every 12") across the back unit. With optional features like a flat top, extended top, digital thermometer, compressor on left, and adjustable legs, you can get exactly what you want. It comes in a standard model, and you can add optional features. SW Sandwich Units: Certified under NSF-7 to maintain temperatures in 86 degree ambient and design to maintain NSF-7 temperatures in 100 degree ambient. Flush mount pans. Full length evaporator coils across back of unit. Easy-in-the-field conversion from door to drawer. Insulated lids. With optional features like front breathing, pan top on right, two tier drawers, three tier drawers, composite board, crumb catcher, flat lid, rear-mounted cutting board, single overshelf, and double overshelves, you can get exactly what you want. It comes in a standard model, and you can add optional features.

Copy and paste the embed code above.

Continental Refrigerator has the Griddle Stands and well as the Sandwich Units to cater to your refrigerator needs. Both units comes with a multitude of benefits, and you can add optional features to the standard model in order to get just the right piece of equipment for your business.

Continental Refrigerator CRA43-9M Specs
Width 43 Inches
Depth 36 1/16 Inches
Height 42 Inches
Cutting Board Width 43 Inches
Interior Width 39 Inches
Nominal Width 48 Inches
Cutting Board Depth 10 Inches
Interior Depth 30 Inches
Interior Height 12 1/2 - 26 Inches
Work Surface Height 35 Inches
Amps 5.3 Amps
Hertz 60 Hertz
Phase 1
Voltage 115 Volts
1/6 Size Pan Capacity 9 Pans
Access Type Doors
Capacity 12 cu. ft.
Compressor Location Side Mounted
Compressor Style Side / Rear Breathing
Door Style Swing
Door Type Solid
Features Alternate Condenser Location
Horsepower 1/4 HP
Made in America Yes
NSF Listed Yes
Number of Doors 2
Number of Shelves 1
Refrigeration Type Air Cooled
Style Counter Height
Temperature Range 33 - 41 Degrees F
Top Type Mega Top

Customer questions about this product

How do I know if this unit will fit under or match the height of my ADA-Height counter?
Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard height unit.

ADA Height: Work surface height is less than 34"; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.
Why is the location of a left or right side mounted condensing unit important?
Consider your kitchen’s layout when choosing whether to have the condensing unit on the right or left side and pick the configuration that will keep the compressor as far from heat sources as possible. By ensuring that your unit’s compressor is farther away from equipment like undercounter dishwashers and hot food holding equipment, you can significantly extend the life of the unit.
What kinds of pans can I use in my refrigerated prep table?
Always refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
Ask your own question!

Continental Refrigerator CRA43-9M Details

Craft your signature sandwiches or salads with the Continental Refrigerator CRA43-9M 43" mighty top extra-deep sandwich / salad prep refrigerator! This refrigerator has enough top space to hold up to (9) 1/6 size food pans at a time, giving you the versatility you need to offer guests a variety of different ingredient choices. The 10" cutting board makes it easy to assemble food products quickly in one area, and thanks to its bottom storage section, you can keep extra ingredients nearby for refill at a moment's notice. This unit also features a spring-loaded, self-closing door so that your unit closes properly, and with a magnetic snap-in door gasket you can be sure of a tight seal.

To maintain foodsafe holding temperatures, this prep table comes with a 1/4 hp compressor that circulates R-134a refrigerant while blowing forced air over the top of your ingredient pans for even chilling. The condenser is conveniently located in the front and slides out easily so you can service it as needed, and 1 epoxy-coated steel shelf allows you to make the most of your interior storage space, without the fear of corrosion.

The front and top of the unit are made of heavy-duty stainless steel, while the end panels, rear, and interior are made of aluminum for long-lasting durability. For excellent temperature retention, the whole unit is insulated with 2" of CFC-free polyurethane, and thanks to its 5" casters, this prep table moves with ease when it comes time to clean your kitchen. This unit requires a 115V electrical connection.

Overall Dimensions:
Left to Right: 43"
Front to Back: 36 1/16"
Height: 42"
Capacity: 12 cu. ft.

Interior Dimensions:
Left to Right: 39"
Front to Back: 30"
Height: 26"
Height (over condensing unit): 12 1/2"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for Continental Refrigerator CRA43-9M

270CRA439M Spec Specsheet Continental CRA Manual Manual Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Continental assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register