• Free Shipping!  

or enter your email to be instantly sent the price!

Ships free with Plus

One of our friendly Customer Service reps will be happy to give you the price for this item! Start a Live Chat
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

Accessories & Options

*

Other Available Finishes:

  • Stainless steel exterior with galvanized steel interior and stainless steel floor
  • Pass-through design
  • Shallow depth design fits into narrow areas
  • Easy-to-service slide-out condensing unit
  • Maintains food safe temperatures in 100 degree Fahrenheit ambient temperatures
  • High-density foamed-in-place polyurethane insulation
  • Automatic, energy-saving non-electric condensate disposal
  • 115V, 1/3 hp, R-134a refrigerant

Condition:

New
Shipping:

Usually Ships in 4 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

Continental Refrigerator: Cleaning the Condenser

Continental Refrigerator: Cleaning the Condenser

Today, we're going to discuss the importance and the procedure of cleaning your condenser coil on your Continental refrigerator or freezer. This is important for many reasons. Firstly, it will conserve energy, cut down on your service costs, and also add life to your compressor. It's always important to disconnect the power to your cabinet before doing any preventive maintenance. The first thing you want to determine is where your condensing unit is located. It could be located on the top of the unit, at the rear of the unit, or on the front. Now what you want to do is located the condensing unit and remove the front grill. Once the grill is removed, you'll see the condensing unit and the condenser coil looks like the radiator in your car and inspect for any dirt or paper. Using a stiff nylon brush, remove any debris in a downward motion and always go in the direction of the fins. Depending on the amount of dirt, you may also want to use a shop-vac and you can also pass a flashlight into the fins to see if you can see through or have any additional blockage. If everything looks good, reattach the grill and start your unit. If further information is needed, consult the operation manual on our website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Conserve energy and cut down on service costs by cleaning the condenser coil on your Continental refrigerator or freezer! This will extend the life of your compressor and keep it running properly.

Continental Refrigerator: Replacing a Door Gasket

Continental Refrigerator: Replacing a Door Gasket

In this segment, we're going to discuss the care and the steps needed to replace the door gasket on your Continental refrigerator or freezer. It's very important to maintain your gaskets. On a regular basis, they should be inspected for any wear or tear on the sides or on the top. If needed to clean your gasket, use mild soap with warm water and a soft-bristle brush. If a door gasket is required, contact the factory or your supplier with the model and serial number of the case and that'll determine exactly the part number and the gasket needed. No tools are required to replace the gasket. Grasp the top corner or the door gasket and pull straight out of the retainer. Once the gasket is fully removed from the door, take the new gasket and line up the dart on the gasket with the retainer. Pushing with your thumb, making sure that the dart is in line. Once the gasket is in place, close the door, inspect for any gaps or sealing issues, and that's all that is needed to replace a door gasket on your Continental refrigerator or freezer. If additional information is needed, consult the factory or the operation manual, which can be downloaded on www.continentalrefrigerator.com.

Copy and paste the embed code above.

Maintain the gaskets on your Continental refrigerator and freezers with these simple instructions! By inspecting the gaskets for wear and tear, you can ensure there are no gaps or sealing issues on your units.

Continental Refrigeration Back Bar Equipment

Continental Refrigeration Back Bar Equipment

The customer is the highest priority for Continental Refrigeration. Not do they provide superior customer service, but they also have an abundance of equipment models to fit your specific food service needs! Continental Refrigeration's keg coolers range in size from 24" to 90" in various depths. They offer a standard model with textured baked enamel finish. For a more advanced keg cooler, you can add front breathing technology, faucets to the right, dual and triple faucets, and a right-side compressor. Continental Refrigeration's back bar coolers also range from 24" to 90" in various depths. Like the keg cooler, the back bar cooler is also available with front breathing technology. However, there are different additions that you can add. Depending on your preference, you may add sliding glass doors, hinged glass doors, a pass-thru, or a right-side compressor. No matter what kind of cooler or appliance you are looking for, Continental Refrigeration is there to help!

Copy and paste the embed code above.

With over 2000 models of food service equipment, Continental Refrigeration is a top "solutions provider" for all businesses! From restaurants and bars to bakeries and delis, this American company can provide you with innovative appliances.

Continental Refrigerator: Electric Condensate Heater Installation

Continental Refrigerator: Electric Condensate Heater Installation

In this segment, we're going to discuss the installation of the optional electric condensate heater with thermostat to take the place of the non-electric condensate pan that comes standard with your equipment. Electric condensate heater may be needed in high humidity and heavily used applications. It is always important with any piece of Continental equipment that has an open pan opening, that pans be left in the top section at all times. If pans are removed at night and that space is left open, condensation will accumulate and the heat from the kitchen will be drawn into that area and that may be the cause of your excessive condensation. If the electric heater is needed, it's easily installed. Remove the rear back cover, two Phillips screws at the lower section, lift the cover, and set it to the side. It's always important to disconnect the power to any piece of equipment before doing any type of work. Once the rear cover is removed and the power is disconnected, take your electric heater and place it in the same non-electric condensate pan that comes with the unit. Have the heater loose, facing the rear. Place it in the pan and the plastic tubing, make sure it's directed into the pan. You may have to adjust the length of the tubing by trimming it down so the plastic is not touching the electric heating element as this will melt. There's a provision in the lower section and that condensing unit area where the condensing unit plugs into the receptacle. One side is marked condensing unit and one side is marked vaporizer. This would be plugged into the side that's marked vaporizer and the extra, additional cord, you can coil that up and use a wire tie or electrical tape so that it doesn't interfere with the fan, go below the bottom of the box, or lay in the pan. Once that is done and power has been checked, make sure everything is tight, make sure there's no vibrations, and you can reinstall the rear cover. Once the rear cover is reinstalled, you're ready to plug the case in and it's back in operation. If additional information is needed, consult the operation manual or the website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Install your electric condensate heater within your Continental until by following these simple steps! An electric condensate heater is needed for heavily used applications and in high humidity areas.

Continental Refrigeration Thermometer Calibration

Continental Refrigeration Thermometer Calibration

In this segment, we're going to discuss the calibration of your LED digital thermometer on your Continental refrigerator or freezer. It's always important to check the calibration before calling the factory or your supplier for service. This can easily be done by placing an accurate thermometer on the center shelf, closing the door for 10 minutes, and then comparing the inside to the outside. If the two numbers do not meet each other, figure out how many degrees you either need to go up or down and then calibration would be needed at this point. You would go to the top of the thermometer. Hit the right hand center, and you'll see CAL, which stands for calibrate. Hit it a second time and you'll see a number. If you need to increase the temperature on the thermometer, you would go to the upper left hand corner. To decrease, the lower left hand corner. Figure out how many degrees you need to change, push that the number of times, and go back over to the right until you see the desired number that corresponds to the inside. You may have to do this a few times to get it to the proper temperature and once that is achieved, let the temperature settle for another 10 minutes. Do a second check and if everything matches, calibration is complete.In this segment, we're going to discuss the calibration of your dial thermometer on your continental refrigerator or freezer, which is easily done with a small, slotted screwdriver. The most important thing is to make sure that the calibration is correct before you contact the factory or your supplier for any service. If service is need, there's a tag on the inner wall of the refrigerator or freezer with the model and serial number. First, place the thermometer on the center shelf if you know it's accurate and calibrated properly. Close the door and let the temperatures settle down for at least 10 minutes. Once that is achieved, you take the small screwdriver, put it under the bezel of the thermometer, and pry off. Once the cover's removed, take your slotted screwdriver, place it in the center screw of the thermometer, and turn it either to the right or to the left to make it colder or warmer. Once the thermometer is set to the proper temperature, let the box settle for another 10 minutes. If you're happy with the two readings, replace the thermometer bezel cover and you're complete. If additional information is needed, you can consult the website at www.continentalrefrigerator.com.

Copy and paste the embed code above.

Calibrate your digital or dial thermometer with these simple steps! Calibration will ensure a perfect internal temperature in your Continental refrigerator or freezer.

Continental Refrigerator Cold Solutions

Continental Refrigerator Cold Solutions

Continental Refrigerator: Cold. Period. Thirst environments, Cold Solutions. KC Keg Coolers: Unique forced air design utilizes fans (approx. every 12") across the entire unit. Readily removable front, rear, and side venting louvers. Stainless steel reinforced threshold sills. Front breathing. Continuously cooled, 3" diameter beer columns with stainless steel lever faucet. Easily removable stainless steel drip tray. With optional features like a stainless steel exterior, towers on the right, dual or triple faucets, towers on the left, and a compressor on the right, you can get exactly what you want. There is the standard model, and you can add optional features to it. BBC Back Bar Coolers: Unique forced air design utilizes fans (approx. ever 12") across the entire unit. Readily removable front, rear, and side louvers. Stainless steel reinforced threshold sills. Front breathing. With optional features like a hinged glass door, sliding glass door, pass-thru, stainless steel exterior, and a compressor on the right, you can get exactly what you want. There is the standard model, and you can add optional features to it.

Copy and paste the embed code above.

Continental Refrigerator has the Keg Coolers and well as the Back Bar Cooler to cater to your refrigerator needs. Both units comes with a multitude of benefits, and you can add optional features to the standard model in order to get just the right piece of equipment for your business.

Continental Refrigerator BBC69S-SS-SGD-PT Specs
Width 69 Inches
Depth 25 Inches
Height 36 3/4 Inches
Nominal Depth Narrow
Amps 7.7 Amps
Hertz 60 Hertz
Phase 1
Voltage 115 Volts
Capacity 18 cu. ft.
Casters No
Compressor Location Side Mounted
Compressor Style Front Breathing
Door Style Sliding
Door Type Glass
Exterior Finish Stainless Steel
Features Alternate Condenser Location
Horsepower 1/3 HP
Made in America Yes
NSF Listed Yes
Number of Doors 4
Number of Kegs 3
Number of Shelves 4
Pass-Through Yes
Top Type Counter Level

Customer questions about this product

Why is the location of a left or right side mounted condensing unit important?
Consider your kitchen’s layout when choosing whether to have the condensing unit on the right or left side and pick the configuration that will keep the compressor as far from heat sources as possible. By ensuring that your unit’s compressor is farther away from equipment like undercounter dishwashers and hot food holding equipment, you can significantly extend the life of the unit.
Ask your own question!

Continental Refrigerator BBC69S-SS-SGD-PT Details

Great for use in even the busiest bars, this Continental Refrigerator BBC69S-SS-SGD-PT 69" shallow depth pass-through back bar cooler delivers superior performance and plenty of refrigerated storage space for bottled and canned beverages, and even for kegs! This front-breathing unit features a shallow depth design so you have more room to maneuver behind the bar, a sleek stainless steel exterior to resist the wear and tear of everyday use, and a galvanized interior with reinforced steel floor to provide additional support for heavy loads of bottles, cans, and kegs. In addition, the pass-through design of this model is great for front of the house applications since you can load the unit from one side and serve guests from the other.

To make loading easy, it also boasts stainless steel reinforced threshold sills and 4 epoxy-coated shelves. Four sliding glass doors provide easy access to the interior and offer great merchandising potential. As opposed to swing doors, sliding doors don't block the aisle when they're open. Additional features include a 304 stainless steel countertop that resists corrosion, an extra-large evaporator coil for consistent product temperature and quick recovery, and a powerful 1/3 hp condensing unit that slides out for easy cleaning and maintenance. This model also features Continental Refrigerator's automatic non-electric condensate removal system to help save energy. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 69"
Depth: 25"
Height: 36 3/4"
Capacity: 26 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for Continental Refrigerator BBC69S-SS-SGD-PT

Manual Manual Warranty Warranty Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Continental assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register