UPC Code:




Usually Ships in 1 Business Day
When will I receive my item?

Camtainer Faucet and Spout Assembly

Camtainer Faucet and Spout Assembly

First verify you have all parts from the faucet and spout assembly. Our faucet kit, number 60267, consists of both the faucet and wing nut. The spout kit, part number 64003, includes the flat rubber washer, spout, fiber washer, hex nut, and stainless steel “C” ring. We will use Cambro’s 100 LCD for our demonstration. Begin by removing the existing faucet and spout, to do this, turn the wing nut in the clockwise direction until the faucet comes off. Remove the “C” ring by sliding it off. Press the wing nut downwards until it sits flush with the ribs on the hex nut. Turn the wing nut in a counter clockwise direction until the hex nut is loose. Remove the wing nut. Continue turning the hex nut by hand, in a counter clockwise direction, until you can remove the spout. The next step is adding the new faucet and spout. Place the rubber washer flush against the lip of the spout. Insert the spout with the flat rubber washer, attached through the hole in the Camtainer. Place the fiber washer around the spout. Place the hex nut, rib side up, on the spout and screw it on by turning it in a clockwise direction. Tighten the hex nut by using the wing nut, pushing it downward and turning it in a clockwise direction. Continue to tighten the hex nut until you are not able to tighten it any longer. Place the “C” ring on the spout in the slotted area. Take the faucet and place the threaded opening over the spout. Hold the faucet in place with one hand and tighten the wing nut by threading the nut on the threads of the faucet and turning in a counter clockwise direction. Tighten by hand until you are no longer able to tighten, and the wing nut is firmly in place. Congratulations you have now completed the faucet and spout kit assembly. When testing for leaks, use hot water. Make sure to wear the appropriate safety equipment to prevent the water from touching the skin. Fill the container and allow it to sit for five minutes. Look for any drops of water from the connection of the faucet to the spout. If drops are visible, simply empty the container and tighten the wing nut by turning it counter clockwise until you are unable to tighten it anymore. Test again with hot water, and empty and tighten until there are no visible leaks. That is how you test for leaks in your Camtainer faucet and spout assembly.

Copy and paste the embed code above.

Cambro teaches you how to assemble your faucet and spout.

Made in America Yes


Keep your Camtainer in perfect working condition with this Cambro 64003 replacement spout. This spout kit contains a flat rubber washer, the spout, a fiber washer, a hex nut, and a "c" ring to assemble the spout on the inside of the Camtainer. This replacement spout will help to keep the hot chocolate and coffee flowing, and will make beverage service a breeze. For a complete faucet assembly (including the outside parts 60267 and the inside parts 64003), purchase 214FAUCETKIT instead.

  • Made in America

    Made in America

    This item was made in the United States of America.

Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register