$114.99/Each

Ships free with Plus

  • Brews 10 cups of coffee in 3 minutes
  • Includes drip-free glass carafe to eliminate messes
  • Unique sprayhead optimizes flavor extraction
  • Porcelain-coated warming plate with lighted on/off switch
  • Stainless steel hot water tank
  • Easy-to-open lid for water pour-in
  • 120V; 900W

UPC Code:

072504077758

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

Bunn

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Bunn Velocity Brew

Bunn Velocity Brew

Hello! Today we’re going to go through the initial setup process for Bunn Velocity Brew. Bunn Velocity Brew has an internal hot water tank that keeps water at the optimal brewing temperature of approximately 200 degrees Fahrenheit. This allows you to brew a fresh, full pot of coffee in about 3 minutes. Before brewing for the first time, this internal hot water tank must be filled with water. It is important that you do not plug in the brewer before completing a few simple steps to set up your brewer. Plugging in the brewer before performing the initial set up process will result in permanent damage to your brewer and void the limited warranty. To begin the initial set up process, slide the empty brew funnel into the funnel guides. Next you will want to fill your carafe with cold water. Open the lid and pour the water into the brewer. Depending on the model, the lid may spin or flip to open. Once you’ve poured the water into the brewer, position the empty carafe on the base plate below the brew funnel and close the lid. Once you close the lid, water will begin to be drawn into the internal hot water tank. Please wait about 3 minutes while the internal hot water tank becomes partially filled. After 3 minutes, remove the carafe from the base and fill it with cold water again. Open the lid and pour the water into the brewer. Next, position the empty carafe on the base below the brew funnel and close the lid. During this fill cycle, water should begin to flow from the brewer, this means the tank is full. When the water flow stops, pour out the water that has collected in the carafe. Next, replace the empty carafe back on the base plate. Now you may plug in your Bunn Velocity Brew. After you have plugged in your brewer, you’ll need to turn the brewer on by flipping the vacation switch to the on position. Congratulations! You’ve completed the initial set up for Bunn Velocity Brew. Please allow approximately 15 minutes for the water in the tank to reach brewing temperature. For additional information including instructions on how to brew with your Bunn Velocity Brew, please see your use and care manual or visit our website, bunnathome.com.

Copy and paste the embed code above.

Check out this short video to see the important initial steps to set up your Bunn Velocity Brew! These instructions are easy to follow and help you get the most out of your new coffee brewer.

Bunn 38300.0066 Specs
Width 7 1/8 Inches
Depth 13 3/4 Inches
Height 14 5/16 Inches
Amps 7.5 Amps
Hertz 60 Hertz
Phase 1
Voltage 120 Volts
Wattage 900 Watts
Brewer Type Decanter
Power Type Electric
Server Included Yes
Style Single
Type Coffee Brewers
Water Source Pourover

Bunn 38300.0066 Details

Get your morning started right with 10 cups of fresh, piping hot coffee from this Bunn 38300.0066 BX-B Velocity coffee brewer! This pourover coffee brewer has a stainless steel internal hot water tank to keep water at an ideal brewing temperature of 200 degrees Fahrenheit. Designed with on-the-go coffee drinkers in mind, this brewer can produce an entire pot of coffee in approximately 3 minutes, and its drip-free glass carafe will keep your countertop clean of the spills and messes that sometimes result from fast pouring.

This Bunn pourover brewer delivers excellent quality coffee thanks to its unique sprayhead, which ensures consistent, total flavor extraction from your ground coffee. Plus, this coffee maker has a porcelain-coated warming plate with a lighted on/off switch to keep your coffee hot for extended periods of time.

Overall Dimensions:
Left to Right: 7 1/8"
Front to Back: 13 3/4"
Height: 14 5/16"

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Bunn 38300.0066

Spec Sheet Specsheet Manual Manual BUNN Waranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Bunn 38300.0066 BX-B Velocity 10 Cup Pourover Residential Coffee Brewer

    5.0 stars from 1 review

    1
    0
    0
    0
    0

    People Talk About:

    price pot opt made larges half great capacity bunn better

    This is a great pot. Quality made like all bunn products. Not the larges capacity. Next time I will prob opt for the a10 but at half the price this is a better value.

    Posted on

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register