Beverage-Air HRPS3-1HS Horizon Series 78" Solid Half Door All Stainless Steel Reach-In Refrigerator
This product is no longer available. We've left this page up for reference only.
- All stainless steel exterior and interior
- 1/2 hp top-mounted compressor circulates R290 refrigerant
- Maintains temperatures from 36-38 degrees Fahrenheit in 100 degree ambient environment
- 9 epoxy-coated shelves are adjustable in 1/2" increments
- 6 self-closing solid half doors with stay open feature
Beverage Air's Horizon series reach-in refrigerator is a must-have in your kitchen! Watch this video for an in-depth look at its key features.
|Beverage-Air HRPS3-1HS Specs|
|Height||78 1/2 Inches|
|Interior Width||73 1/2 Inches|
|Interior Depth||28 Inches|
|Interior Height||60 Inches|
|Capacity||74 cu. ft.|
|Compressor Location||Top Mounted|
|Construction||All Stainless Steel|
|Number of Doors||6|
|Number of Shelves||9 Shelves|
|Temperature Range||36 - 38 Degrees F|
Customer questions about this product
- Can I use the top of my unit for storage?
- Nothing should be stored on top of your unit. Typically, top mount refrigerators and freezers do not have an actual top. If you’re looking for extra storage space, we recommend choosing a bottom mount unit.
- I live in California. Can I still purchase this product?
- Because this product does not meet the California Cooling Act standards, it is not available to establishments located in the state of California.
- What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
- This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
- Does Beverage-Air warrant this item for use in a food truck?
- This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
Beverage-Air HRPS3-1HS Details
This Beverage-Air HRPS3-1HS Horizon Series 78" solid half door reach-in refrigerator is perfect for keeping all of your refrigerated ingredients close at hand! To ensure temperature retention and optimal energy efficiency, the cabinet features CFC and HCFC-free foamed-in-place polyurethane insulation. It also boasts a self-closing door design with a stay-open feature when opened past 120 degrees. The doors are even field-reversible, so you can set up the perfect configuration for your kitchen layout.
To make maximum use of its spacious interior, this reach-in refrigerator comes with nine adjustable epoxy-coated wire shelves. The half door design helps maintain interior temperatures and conserve energy since you only need to open one section at a time. Additionally, its antimicrobial handles help stop the growth and spread of harmful microorganisms.
The unit's top-mounted 1/2 hp down draft airflow refrigeration system uses R290 refrigerant to maintain product temperatures between 36-38 degrees Fahrenheit, while ensuring even, consistent airflow throughout the cabinet. For added convenience, it features an easy-to-use electronic thermostat to adjust temperatures as needed.
Built for heavy commercial use, this unit features an all stainless steel interior and exterior. Four 6" legs are also included for stability. A 115V electrical connection is required for operation.
Height: 78 1/2"
Width: 73 1/2"
Capacity: 74 cu. ft.
Made in America
This item was made in the United States of America.
Energy Star Qualified
This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.
UL Classified EPH
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL US & Canada
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
This unit comes with a NEMA 5-15P plug.
Resources and Downloads for
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register