Anets SLG50 LP SilverLine 40-50 lb. Liquid Propane Stainless Steel Floor Fryer
- Welded stainless steel tank with smooth finish and a 40-50 lb. oil capacity
- Elliptical heat tubes for greater heat transfer
- Long lasting, high temperature alloy baffles
- Standing pilot light design
- Fully lined, cool to the touch front door
You May Also Need
Pitco Equivalent 3" Swivel Adjustable Height Plate Casters for Fryers - 4/Set
$82.49 / Set
30" Fryer Clean Out Rod with Handle
plus $6.59 / Each
Carlisle 4011105 Sparta 23" High-Heat Fryer Brush with L-Tip Teflon Bristles - 2" Bristle Diameter
plus $24.99 / Each
Regency 48" Stationary Gas Connector Hose Kit with 2 Elbows and Full Port Valve - 1/2"
plus $36.49 / Each
Noble Chemical 2 Gallon Fryclone Fryer Oil Stabilizer and Filter Powder - 2/Case
plus $52.99 / Case
Noble Chemical 5.3 oz. / 160 mL Fryclone Fryer Oil Stabilizer and Filter Powder - 90/Case
plus $38.99 / Case
Noble Chemical 8 oz. / 240 mL Fryclone Fryer Oil Stabilizer and Filter Powder - 72/Case
plus $40.99 / Case
Fill out your cooking lineup or replace a worn out fryer with this Anets SLG50 40-50 lb. liquid propane stainless steel floor fryer.
This unit boasts an impressive 120,000 BTUs of heating power that is ideal for your lower volume frying needs! Whether you are making popcorn chicken and shrimp for your tavern or adding mozzarella sticks and french fries to your snack bar, this 40-50 lb. floor fryer is a great choice. This fryer provides a dependable, easy-to-use option for many types of foodservice establishments.
While Supplies Last!
Made in America
This item was made in the United States of America.
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
CSA Design Cert
This item has been certified by the Canadian Standards Association (CSA) and meets applicable U.S. standards.
CSA Blue Flame
This item has been certified by the Canadian Standards Association (CSA) and meets applicable Canadian standards for appliances using gas or petroleum fuel.
1/2" Gas Connection
This unit comes with a 1/2" gas connection.
Integrated Gas Control Valve
An integrated thermostat and gas control valve allow for a fully customized cooking experience, and the valve serves to prevent gas flow to the main burner until the pilot is established, ensuring safe use for your employees at all times. A standing pilot light design provides a ready flame whenever heat is required.
The stainless steel construction with a galvanized steel sides and back adds extended durability, while a fully lined door keeps the outer door at a cooler, safe to the touch temperature. The welded stainless steel tank is fitted with an extra smooth peened finish to ensure easy cleaning.
Two Fry Baskets
This fryer comes with two nickel plated oblong fry baskets so that you can get started cooking right away! Plus, the twin baskets are great for smaller portions or cooking different types of foods at the same time.
Removable Basket Hanger
The basket hanger provides a convenient place for baskets to drain after cooking. It is also completely removable without the use of tools for when you need to thoroughly clean your fryer at the end of the day.
Built-In Flue Deflector
This fryer features a built-in integrated flue deflector to direct hot gases out through your ventilation system.
1 1/4" Drain
The full port drain ensures that you can quickly and easily drain away used oil for disposal.
The adjustable 6" legs mean that you can keep your fryer level and stable on uneven floors.
3 Tube-Style Burners
3 tube-style burners heat the oil in this fryer's tank. These elliptical tubes boast more surface area than competitive models and provide an even greater heat transfer. Also, this unit has a deep cool zone for easier cleaning.
Customer Q&A Ask a Question
Compare to Other Products
- Width: 15 5/8 Inches
- Depth: 27 5/8 Inches
- Height: 42 7/16 Inches
Resources and Downloads for
Anets SLG50 LP
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register