Watts WD-20 Grease Interceptor 40 lb. Grease Trap
- PDI Certified
- 20 GPM flow rate and 40 lb. grease capacity
- 3" inlet & outlet
You May Also Need
|Width||15 3/4 Inches|
|Flow Rate||20 GPM|
|Inlet and Outlet Size||3 Inches|
The Watts WD-20 Grease Interceptor 40 lb. grease trap prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment.
Grease traps like the Watts WD-20 are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations. A flow restrictor on the inlet side of the interceptor slows incoming effluent and redirects it through baffling inside the grease trap.
As the flow is gradually slowed, lighter than water substances accumulate inside the trap above the static water line.
The Watts WD-20 Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor).
The Watts WD-20 grease trap has a grease capacity of 40 lbs., and a flow rate of 20 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.
Please consult the specification sheet for detailed diagrams, measurements, sizing guidelines, and installation requirements.
Extended lead times may apply for this item based on availability. Please contact us for the current lead time.
24"L x 15 3/4"W x 15"H
Flow Rate: 20 GPM (Gallons Per Minute)
Grease Capacity: 40 lbs.
Inlet & Outlet Size: 3"
This item has been certified by the Plumbing and Drainage Institute (PDI), which promotes the advancement of Engineered Plumbing Products.
Watts WD-15 Grease Interceptor 30 lb. Grease Trap
Watts Replacement Gasket for Grease Interceptor
Watts GI-300-K Large Capacity Grease Interceptor 600 lb. Grease Trap
Watts WD-15-THD Grease Interceptor 30 lb. Grease Trap with Threaded Connections
Watts GI-400-K Large Capacity Grease Interceptor 800 lb. Grease Trap
Watts WD-10-A Semi Automatic Draw Off Grease Interceptor 20 lb. Grease Trap
Watts WD-4-THD Grease Interceptor 8 lb. Grease Trap with Threaded Connections
Watts WD-50-THD Grease Interceptor 100 lb. Grease Trap with Threaded Connections
Frequently Purchased Together
Regency 16 Gauge Three Compartment Stainless Steel Commercial Sink with Two Drainboards - 58" Long, 10" x 14" x 10" Compartments
Regency Wall Mounted Swivel Faucet with 8" Centers - 12" Swing Spout
Regency Wall Mounted NSF Hand Sink with Gooseneck Faucet - 17" x 15"
40 lb Grease trap is required from my local health dept. It is nicely priced, built well and should last for years with an easy off cover for cleaning.
Tuwanna R. from Louise's Sweets Posted on 03/26/2014
The Dormont WD-20 40lb Grease Trap was what the Health Dept required. Easy for the plumber to install and no issues with it yet. Doesn't take up much room either.
Joseph C. Posted on 11/17/2011
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register