Watts WD-10-THD Grease Interceptor 20 lb. Grease Trap with Threaded Connections
- PDI Certified
- 10 GPM flow rate and 20 lb. grease capacity
- 2" threaded inlet & outlet
You May Also Need
|Length||21 3/4 Inches|
|Flow Rate||10 GPM|
|Inlet and Outlet Size||2 Inches|
The Watts WD-10-THD Grease Interceptor 20 lb. grease trap with threaded connections prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment.
Grease traps like the Watts WD-10-THD are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations. A flow restrictor on the inlet side of the interceptor slows incoming effluent and redirects it through baffling inside the grease trap.
The Watts WD-10-THD Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor).
The Watts WD-10 grease trap has a grease capacity of 20 lbs., and a flow rate of 10 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.
Please consult the specification sheet for detailed diagrams, measurements, sizing guidelines, and installation requirements.
Extended lead times may apply for this item based on availability. Please contact us for the current lead time.
21 3/4"L x 14"W x 12"H
Flow Rate: 10 GPM (Gallons Per Minute)
Grease Capacity: 20 lbs.
Threaded Inlet & Outlet Size: 2"
This item has been certified by the Plumbing and Drainage Institute (PDI), which promotes the advancement of Engineered Plumbing Products.
Watts WD-10 Grease Interceptor 20 lb. Grease Trap
Drain Opener / Maintainer
Watts WD-20-THD Grease Interceptor 40 lb. Grease Trap with Threaded Connections
Watts GI-150-K Large Capacity Grease Interceptor 300 lb. Grease Trap
Watts WD-35 Grease Interceptor 70 lb. Grease Trap
Watts WD-7 Grease Interceptor 14 lb. Grease Trap
Watts WD-50-A Semi Automatic Draw Off Grease Interceptor 100 lb. Grease Trap
Watts WD-35-THD Grease Interceptor 70 lb. Grease Trap with Threaded Connections
Watts WD-20-A Semi Automatic Draw Off Grease Interceptor 40 lb. Grease Trap
Watts WD-4 Grease Interceptor 8 lb. Grease Trap
We love our new grease trap! It was cheap, easy to install, and came quickly in the mail. This is a big improvement over the 10 year old one we had before. I wish we had done it sooner!
Jane B. from Pie Shop, Inc. Posted on 09/23/2014
The Dormont WD-10-THD Grease Interceptor 20 lb. Grease Trap with Threaded Connections came in a timely manner, and does the job. Give it a try.
Judith B. from Five Points Coffee Posted on 04/29/2013
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register