Your impinger oven is equipped with a state-of-the-art digital controller. The panel has a single ON/OFF power switch, which operates the fan, conveyor motor, and heat. The easy-to-use four push-button panel controls time, temperature, up, and down. The BFD display indicates the actual cavity temperature for the left and right side of the oven, conveyor speed, and heating indicator for left and right side. Follow this procedure for operating your Lincoln impinger ovens: first, make sure your ventilation system is on and running properly. Then, to start the oven, push the ON switch to ON. Next, check to ensure that the oven is set to the correct bake time and temperature. You do this by pushing the time and temperature buttons at the same time for five seconds. This enters the set point mode. Once in set point, push the time button to see the set time. If set incorrectly, set to the proper time by scrolling up or down with the arrow keys. Once the time is set, push the temperature button to enter the temperature set point. The preset time will automatically be saved in the memory. Be sure to check both the left and right side temperatures to make sure they're correct. If the temperature is set incorrectly, adjust to the proper side needing adjusted by pushing the temperature button repeatedly until you have the correct side. Once the left or right side is selected, adjust the temperature setting by scrolling up or down with the arrow keys. When in Fahrenheit or "F" mode, the temperature is adjusted in five degree increments. When in Centigrade or "C" mode, the temperature adjustment will be in one degree increments. Once the time and temperature are set correctly, release all buttons. After five seconds, the selected set points will be stored in the memory. In a few seconds, the heating indicator should come on. If the indicator does not light, turn the ON switch off. Wait five minutes and turn the switch on again for gas ovens only. Allow thirty minutes for the oven to preheat. To shut down the impinger, push the ON switch to the OFF position. Caution: oven walls and parts will remain very warm after shutdown. You may also choose the direction of the conveyor belt. Use the conveyor toggle switch on the back of the oven. Maintaining your impinger oven involves a simple daily cleaning routine, a thorough weekly cleaning, and a few special projects every month.

Copy and paste the embed code above.
The basic operations of the 1600 series ovens from Lincoln are covered in this video, from the basic functions on the control panel to standard operating procedures.

Related Videos

Lincoln Impinger Oven 1600 Series: Daily Cleaning
Lincoln Impinger Oven 1600 Series: Daily Cleaning

This video shows you how to clean your 1600 series Lincoln Impinger oven. Learn how to tidy up the exterior and interior of your oven to keep it looking spick-and-span!

Lincoln Impinger Oven 1600 Series: Optional Soil Shields
Lincoln Impinger Oven 1600 Series: Optional Soil Shields

A look at the benefits of using the optional soil shield. Soil shields will help to make cleaning your 1600 series Lincoln Impinger oven a breeze!

Lincoln Impinger Oven 1600 Series: Every Three Months
Lincoln Impinger Oven 1600 Series: Every Three Months

In order to keep your oven running the best it can you should regularly perform some simple maintenance tasks. Check out this video to learn what you should do after every three months of use to keep your oven in great working condition!