In 1947, T&S introduced the first pre-rinse unit to the foodservice industry. Within four decades, we had already innovated it into the first low flow unit, designed to save water and energy. Our pre-rinse units were the first to be endorsed by the green restaurant association, and the T&S name has always carried the assurance of top-quality performance and unbeatable service. Today, T&S has taken pre-rinse innovation to the next level.

We have completely overhauled the B-0107-C spray valve used in our pre-rinse units, keeping all of its superior construction, while dramatically reducing the amount of water it uses. You may be familiar with EPAct, the Energy Policy Act of 2005. That legislation set a maximum flow rate for spray valves at 1.6 gallons per minute at 60 psi. You may also be aware that T&S spray valves have always beaten this standard, some by as much as 25%. Our revolutionary new B-0107-C Valve performs at only .65 gallons per minute at 60 psi. 0.65- that's a water savings of 60% over EPAct standards.

Now, you may be thinking, the flow rate may be lower, but what about the performance? I may be saving water, but surely it takes longer to clean, right? Wrong. T&S subjected our new B-0107-C Valve to the dried-on tomato paste test, using the most stringent state standard. California requires a clean plate after only 30 seconds. In addition, other organizations' requirements are 26 seconds or under. At T&S, we have always endeavored to beat this time with our spray valves, to reach a more stringent goal of 21 seconds or less. Even though the new B-0107-C Valve has a drastically reduced flow, it still cleans the plate within the strict California standard, as well as our own, more rigorous standard. Way less water, just as fast! How does our new B-0107-C Valve line up with the competition? Some manufacturers make pre-rinse units that only just meet the EPAct standard of 1.6 gallons per minute. Fisher's model flows at 1.15 gallons per minute at 60 psi, and the valve from CHG flows at 1.2 gallons per minute. The new T&S B-0107-C blows them all away with its amazingly low 0.65 gallons per minute, offering a savings of 100,000 gallons a year over a valve that merely meets EPAct standards.

Enjoy top-quality T&S construction, our outstanding service support, a spray valve designed to beat the strictest of standards, while still delivering powerful performance, and a low, low flow rate of 0.65 gallons per minute. Choose the T&S B-0107-C Spray Valve and watch your savings begin to grow.


Copy and paste the embed code above.
Learn all about the super low flow T&S Brass B-0107C super low flow pre-rinse spray valve! This high performance low flow spray valve could save you hundreds of dollars per year in water costs.

Related Videos

T&S Brass Low Flow Pre Rinse Spray Valve vs. Aerator Spray Valve
T&S Brass Low Flow Pre Rinse Spray Valve vs. Aerator Spray Valve

Learn how T&S Brass Low Flow pre rinse spray valves and aerators can help save your business thousands throughout the year.

Troubleshooting Faucet Leaks
Troubleshooting Faucet Leaks

A leaky faucet can increase your water bill by hundreds of dollars per year. In fact, 1 drip/second equals about 3,000 gallons/year! Luckily, most causes of leaky faucets are easy to diagnose and inexpensive to repair. Watch this video to learn how!

Crepe Batter Spreading Techniques From Krampouz
Crepe Batter Spreading Techniques From Krampouz

Learn how to expertly use your crepe griddle with this step-by-step guide! Whether your are just starting out, or need a little refresher, this Krampouz video will teach you how to make flat and delicious-looking crepes.