$110.55/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Quick Shipping

Usually ships in 1 business day

Product Overview

  • 5.05 GPM
  • Angled spray valve with hold-down clip, heat-resistant handle, and 360 degree swivel nut
  • 9' coiled polyurethane hose with 1/4" NPT male connection
  • Valve body made from lightweight aluminum
UPC Code:671262564892

T&S Brass and Bronze Works PG-35AV-CH Specs

Quantity
1/Each
Shipping Weight
3 lb.
Hose Length
9 Feet
Features
Made in America  With Hose
Flow Rate
5.05 GPM
Type
Spray Valves

Customer questions about this product

Can I get a spray valve with a higher flow rate (GPM)?

A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).

Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM

These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

How is the pre-rinse hose length measured?

Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.

Ask your own question!

T&S Brass and Bronze Works PG-35AV-CH Details

The T&S PG-35AV-CH pet grooming spray valve is designed to provide superior performance and durability that you can count on, whether you're using it in a brand new installation or replacing a broken part. It boasts a flow rate of 5.05 GPM (at 60 psi) and comes with an angled head and heat-resistant handle for increased comfort during use. The valve comes with a hold-down clip so that you don't have to hold down the trigger constantly, further increasing ergonomics and reducing operator fatigue. The 9' coiled polyurethane hose gives you plenty of room to maneuver around a pet grooming station as you give your furry friends a bath, but when not in use, it springs back to its coiled form to save you space and also the time of having to retract or manually re-coil a standard hose. And since it has a 360 degree swivel nut, you get increased range of motion and a longer hose life because you are putting less stress on the hose's connection points. It boasts a 1/4" NPT male connection and the valve body is made from lightweight aluminum for better handling.

T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

Need Parts & Accessories?

Show replacements and accessories for T&S Brass and Bronze Works PG-35AV-CH today!

Resources and Downloads for
T&S Brass and Bronze Works PG-35AV-CH

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

Overall User Rating

5.0 stars from 3 reviews

Rated 5 out of 5 stars

3 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

0 reviews rated this 1 out of 5 stars.

Frequently Mentioned

  • sprayer
  • great
  • easy
  • nice
  • coat
  • duty
  • favorite
  • gives
  • goldens
  • grip

T&S Brass and Bronze Works Customer Review from