|
This True GDM-35F is a 35
cubic foot, glass door
merchandiser freezer with 8
adjustable, vinyl-coated
shelves, backguard and floor
rack. It has 1 glass door
that is made of extruded
aluminum with a doorframe. It
uses an oversized (R404A)
refrigeration system that
holds a -10 degrees Fahrenheit
temperature,
and -20 degrees Fahrenheit off the
evaporator
coil. The exterior of this
True GDM-35F is a durable,
permanent, non-peel-or-chip,
white, laminated vinyl. The
interior is NSF-approved,
white, vinyl-coated aluminum
with a 300-series stainless
steel floor. The defrost
system of the True GDM-35F
merchandiser freezer is time
initiated and temperature
terminated. It has and
automatic evaporator fan
motor delay during defrost
cycle, and a large evaporator
and coil heater to ensure the
defrost cycle is a short one.
It is a self-contained system
that requires no plumbing.
The True GDM-35F has a
compressor that is bottom
mounted, heavy duty, and easy
to access. This unit requires
115/208-230/60 Hz, single
phase, 3 pole, 4 wire. Its
overall dimensions are 39
1/2"W x 29 1/2"D x 78 1/4"H.
This True GDM-35F comes with
a one year warranty on all
parts, one year on labor and
an additional four years on
the compressor only (no
labor). This product is also
known as GDM35F, GDM 35F and
TRUGDM35F.
About Common Carrier Shipments:
We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
Click a buying guide below for details:
Freezer Merchandiser Buying Guide - You can tell customers about your products. You can tell them that they are better, higher-quality, lighter, faster, stronger, tastier, more durable, easier to use, fast-acting, long-lasting and anything else you want.
|
|
