True TAC-48GS Vertical Air Curtain Glass Sided Refrigerator Product details

This True TAC-48GS 34 cubic feet glass sided refrigerator with vertical air curtain has 4 adjustable shelves and safety shielded florescent lights. The interior of the True TAC-48GS is white aluminum and stainless steel floor and deck pans, entire cabinet is foamed-in place using high density, CFC free polyurethane insulation. The exterior of the True TAC- 48GS is made of durable and permanent non-peel or chip white vinyl front and sides with matching white aluminum back, with durable and break- resistant Plexiglas lower front panel. The True TAC- 48GS features a time initiated, time terminated off cycle defrost system. It has factory engineered self- contained capillary tube system using environmentally friendly CFC free R404A refrigerant. The True TAC- 48GS uses an extra large evaporator coil and condenser, balanced with higher horsepower compressor that maintains a temperature of 33 degrees Fahrenheit to 38 degrees Fahrenheit. The TAC-48GS has a bottom-mounted condenser and the back interior wall is perforated for superior airflow. The True TAC-48GS is designed to operate in an environment where temperature and humidity do not exceed 75 degrees Fahrenheit and 55% relative humidity. Please note that the True TAC- 48GS SHOULD NOT BE INSTALLED near HVAC vents, fans or doorways that will disrupt the air curtain and compromise the function of the cabinet. Unit should not be installed in direct sunlight and will run most efficiently when completely loaded with product. Dimensions: 48"W x 30 1/8"D x 80 5/8"H. The True TAC-48GS is 208-230/60/1 and needs a 15 amp dedicated outlet. NSF listed. Warranty for the True TAC-48GS is 1 year on all parts and labor and an additional 4 year on compressor. This product is also known as TAC48GS, TAC 48GS, TAC-48-GS, TRUTAC48GS and TRU TAC 48GS.

Vendor Item Numbers: TAC-48GS BLACK, TAC-48GS

About Common Carrier Shipments:

We want your delivery to go smoothly, so we kindly ask that you read the following tips:

(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.

(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.

(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.

(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.