$108.07/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Push button metering cartridge for easy use and water conservation
  • Plain end outlet with a 2.98 GPM flow rate
  • Includes spanner bit for easy metering adjustment
  • 1/2" NPT female inlet with 2" flange
UPC Code:671262680653

T&S Brass and Bronze Works B-0700-01 Specs

Quantity
1/Each
Shipping Weight
2.38 lb.
Spout Length
2 1/8 Inches
Faucet Width
2 Inches
Faucet Height
3 3/8 Inches
Cartridge Type
Metering
Faucet Centers
Single
Features
ADA Compliant  Made in America
Finish
Chrome
Handle Type
Push
Material
Brass
Mounting Style
Wall Mounted
Pressure Rating
20 - 125 PSI
Spout Type
Cast
Temperature Rating
40 - 140 Degrees Fahrenheit
Type
Faucets
Water Inlet Size
1/2 Inches

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works B-0700-01 Details

If you need a convenient, reliable single temperature faucet, look no further than the T&S B-0700-01 wall mount faucet! This faucet has a push button metering cartridge that activates the water flow for a set amount of time to save water and utility costs. A spanner bit is included so that you can easily adjust how long the water will flow. Its plain end outlet delivers a 2.98 GPM flow rate for a consistent stream in any application. The faucet has a 1/2" NPT female inlet and a 2" flange.

T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!

Overall Dimensions:
Spout Length: 2 1/8"
Faucet Height: 3 3/8"
Faucet Width: 2"

Attention CA Residents:

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • CSA, Canada

    CSA, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.

Resources and Downloads for
T&S Brass and Bronze Works B-0700-01

A PDF viewer is required to view this product's information. Download Adobe Acrobat software