Name: T&S B-0352-04 Wall Mounted Surgical Sink Faucet with 8" Adjustable Centers, 5 1/2" Rigid Gooseneck, Built In Stops, and 4" Wrist Action Handles
Brand: T&S Brass and Bronze Works
SKU: 510B035204
Price: 246.4 USD
Availability: LimitedAvailability

A silver T&S wall mounted surgical sink faucet with 4" wrist action handles.

$246.40/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Earn up to $7.39 back (739 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

8" centers, adjustable from 7 3/4" to 8 1/4"; 1/2" NPT female inlets with 2" flange
11" overall height; 5 9/16" spread; rosespray outlet
4" wrist action handles
Integral stops allow you to shut off water to faucet without affecting rest of facility
Chrome plated brass construction

UPC Code:400010569151

View all T&S Brass and Bronze Works Medical Faucets

plus
T&S B-0230-K 1/2" NPT Elbow Installation Kit
$35.91/Each
plus
Easyflex White PTFE Thread Seal Tape 1/2" x 520"
$1.29/Each

Quantity: 1/Each
Shipping Weight: 6.66 lb.
Spout Length: 5 3/4 Inches
Faucet Width: 16 Inches
Faucet Height: 10 13/16 Inches
Cartridge Type: Compression
Faucet Centers: 8 Inches
Finish: Chrome
Flow Rate: 23.09 GPM
Handle Type: Wrist
Material: Brass
Mounting Style: Wall Mounted
Mounting Type: Adjustable
Pressure Rating: 20 - 125 PSI
Spout Clearance: 5 1/2 Inches
Spout Type: Gooseneck
Temperature Rating: 40 - 140 Degrees Fahrenheit
Type: Faucets
Water Inlet Size: 1/2 Inches

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works B-0352-04 Details

The T&S B-0352-04 wall mounted surgical sink faucet features 4" wrist action handles, which have a larger surface area so you can use your wrists to operate and limit the risk of contact with harmful pathogens! This faucet has an 11" high rigid gooseneck with a 5 9/16" length and rosespray outlet that produces a softer water flow for hand washing applications. It features 1/2" NPT female flanged inlets that connect to your facility's plumbing, and it has adjustable 8" centers for easy installation. Convenient built-in stops also allow you to easily shut off the water supply to your faucet for maintenance without affecting the flow to the rest of your establishment.

Overall Dimensions:
Spout Length: 5 3/4"
Faucet Height: 10 13/16"
Faucet Width: 16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.