Conveniently display and sell your freshly made donuts, muffins and other pastries in the self-service Structural Concepts Addenda PHRM5682 bakery display case! This 58" wide non-refrigerated free standing pastry merchandiser holds up to eighteen 9" x 26" trays on adjustable shelves to display your pastries or baked goods. Plus, four acrylic bins with lift-up fronts below the shelves provide convenient merchandising space for hard rolls or bagels!
Swinging, self-closing glass front doors and interior lights increase product visibility. An angled mirror in the upper display enhances the merchandising effect, while the white interior helps your products stand out. The base features a 6" deep compartment to hold bakery bags or tongs for grab-and-go convenience. It is UL and NSF Listed, and requires a 120V electrical connection. Please Consult the Specification Sheet for additional details, measurements, and installation requirements.
Standard exterior color is black. Other colors are available upon request. Usually ships in 4-5 weeks.
Overall Dimensions:
Width: 58"
Depth: 39"
Height: 83 1/4"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Standard Limited Warranty:
Structural Concepts Standard limited warranties: One-year parts/one-year labor/five-year motor-compressor.
Parts
One Year: Structural Concepts warrants to the original purchasers, the equipment manufactured by it to be free from defects in material and workmanship under normal use and service within 12 months from the date of original shipment from the factory.
Any items returned to the factory must be authorized by Structural Concepts Customer Service/Technical Service Departments and be shipped prepaid. Replacements will be shipped collect.
This warranty does not include any material, which has been subject to misuse, neglect, damage in transit, accident, negligence, or alteration.
Labor
One Year: Structural Concepts warrants to the original purchasers, the equipment manufactured by it. Structural Concepts will for a period of 12 months from the date of original shipment from the factory pay the cost of labor for repairs and replacement of parts that it has determined to be defective.
This warranty does not include the cost of labor for initial installation, start-up, correction of improper installations, misapplications, repair caused by abuse and negligence, modifications, normal adjustments, drive time to and from repair site, and freon recovery. The cost of service labor reimbursed will be based on straight-time rate and reasonable time for the repair of defect.
All service labor charges are subject to approval by Structural Concepts Technical Service Department. Contact your Master Service Agent. (See pages 70-72)
Motor-Compressor
Five Year: Structural Concepts warrants to the original purchasers that it will repair or exchange at our option, at any time during the five years following the date of original shipment from the factory a motor-compressor assembly of like design and capacity if the motor-compressor assembly or any part thereof is returned prepaid to nearest authorized jobber and is proved to our satisfaction to be inoperative due to defects in material or factory workmanship.
This warranty applies to the original motor compressor only.
The term “motor-compressor assembly" consists of the stator, rotor, eccentric rod, eccentric shaft piston, wrist pin, suction valve, discharge valve, and the cast housing in which these parts are enclosed.
This warranty does not apply to any electrical controls, condenser, evaporator, fan motors, overload switch, starting relay, temperature control, dryer, accumulator, or wiring harnesses after the first year.
No claims can be made against this warranty for spoilage of product. Replacement of the motor-compressor assembly must receive a prior approval from Structural Concepts Technical Service Department.
This warranty does not apply to compressors furnished by Structural Concepts that are remote from the case.
General Conditions: Structural Concepts recommends that the installation, inspection, and start-up of refrigeration equipment be performed by a qualified refrigeration technician.
Structural Concepts makes no other expressed or implied warranty, and no person or representative of the seller is authorized to add to the seller’s liabilities in connection with its products other than what is expressed.
These warranties do not apply to remote (compressor supplied by others) motor compressor applications.
Warranties listed here are for equipment located inside the continental United States and Canada.
All claims must contain the following information:
* The model and serial number of the equipment.
* The date of the equipment failure and place of installation.
* The name and address of the agency that performed the service work.
* A complete description of the equipment failure, circumstances relating to that failure, parts replaced and itemized list of all labor charges incurred.
Structural Concepts shall not be liable for any default or delay in performance caused by any contingency beyond its control.
Warranties do not include any food or business loss and transportation charges to or from Structural Concepts factory.
Condenser coils must be cleaned at regular intervals. Failure to do so can cause compressor malfunction and will void warranty. Cases are designed to operate in an environment of 75° F ambient and 55% relative humidity.
|
Loading
for all your restaurant supply needs!
