• Quantity Discounts!

$258.83/Each

Buy 1 - 4 $287.99/Each

  • All stainless steel construction
  • Measures 30" x 30"
  • 800 lb. top shelf capacity
  • 620 lb. under shelf capacity
Item:
600MTS3030S
Units:
Each
Shipping:
Usually Ships 1 Business Day
When will I receive my Item?
MFR Item:
MTS-3030-316

Companion Items

Need a different height? Try our cut down feature!

How to Assemble a Stainless Steel Work Table

How to Assemble a Stainless Steel Work Table

Our Regency stainless steel worktables are sent to you unassembled in order to save you money on shipping. Today I'll show you how easy it is to assemble these tables! First, let's take a quick look at the parts that come in your box. You have the table top, the undershelf, 4 legs, and you'll find bag in the box with your legs that contains an allen wrench and 2 extra set screws. The rest of the set screws are already loosely screwed into where they belong. Note the protective film on the table top. I recommend you leave this on until you are finished assembling to prevent scratching and scuffing. And keep in mind that, especially with larger tables, having a helper can really come in handy. First, place the table top upside down on a surface that won't scratch it. Here, I'm using the cardboard box it arrived in. Next place the 4 legs in the table top gussets. If one has trouble going in, you may have to give a few turns to the set screws to loosen them. Now, tighten the set screws. At this point, I don't tighten them quite all the way, since I like a bit of play when I am adding the undershelf. To add the undershelf, which not only gives the table extra storage, but also stability, you'll first want to decide at what height you'll want it, and then mark that height on all 4 legs. In any food service application, you'll want the height to be at least 6" off of the ground for food safety. Once marked, slip the undershelf onto the legs to the proper position. Work your way around tightening the 2 set screws for each leg. Now tighten the set screws at the tops of the legs. The table assembly is almost finished, but before I flip it right side up, I wanted to show you the adjustable feet on these tables. Whether you are putting the table on an uneven surface or just need to raise or lower it, you'll appreciate that by simply turning the foot, you can adjust the height by an inch and a quarter. Now it's time to flip the table over and you can peel off the protective film. For cleaning and polishing Regency tables, we recommend Noble Chemical's Excel aerosol cleaner. Thank you for watching. For more information, please check out our worktable buying guide, our work table selector, or use our Live Chat Button to speak with one of our friendly customer service agents!

Copy and paste the embed code above.

Watch this video for some tips on how to assemble a stainless steel work table with an undershelf from Regency! With these step-by-step instructions, you'll have a work table set up and ready for use in no time!

Regency Stainless Steel Work Table Assembly

Regency Stainless Steel Work Table Assembly

Our Regency stainless steel work tables are sent to you unassembled in order to save you money on shipping. In this video, I’ll go over how to assemble your Regency work table. Your table is shipped with a tabletop, under shelf, or legs, and a bag that contains an allen wrench, and two extra set screws. The rest of the set screws are already loosely screwed into place. First, place the tabletop upside down on a surface that won’t scratch it. Next, place the four legs into the tabletop gussets. If one has trouble going in, you may have to loosen the set screw. Now, tighten the set screws. Don’t tighten them all the way until you add the under shelf. To add the under shelf, mark the height you desire on all four legs. In any foodservice application, you’ll want the height to be at least 6” off the ground for food safety. Once marked, slide the under shelf onto the legs. Now go ahead and tighten all of the set screws. These Regency work tables come with adjustable feet, which allow you to change the height of the table up to an 1 1/2” by simply turning the foot. Flip the table over, and peel off the protective film. Now your table is assembled. For cleaning and polishing Regency tables, we recommend Noble Chemical’s Excel Aerosol Cleaner. Thanks for watching, and if you have any questions, please click on our Live Chat button.

Copy and paste the embed code above.

Check out this video for step-by-step instructions on how to assemble your Regency stainless steel work table! Chef Matt will walk you through the process, and you’ll see how quick and easy it is!

Specs
Table Length 30 Inches
Table Width 30 Inches
Table Backsplash Height Without Backsplash
Table Height 24 Inches
Backsplash No
Leg Construction Stainless Steel
Metal Gauge 16 Gauge
Stainless Steel Type Type 304
Tabletop Construction Stainless Steel
Undershelf Yes
Undershelf Construction Stainless Steel

Details

Support a wide variety of equipment in your kitchen with the Regency MTS-3030-316 16 gauge 30" x 30" stainless steel mixer table! This mixer table features a durable 16 gauge type 304 stainless steel top, undershelf, and legs for the long-lasting reliability you need for your business. And thanks to its raised edges, this mixer table ensures your equipment won't tip or slide off the side of the table when in use. This table has a maximum top shelf capacity of 800 lbs. and an under shelf capacity of 620 lbs.

Overall Dimensions:
Left to Right: 30"
Front to Back: 30"
Height: 24"

Downloads

600MTS3030S Specsheet Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Buying Guides

Related Items

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register