$145.48/Each

Buy 1 - 4 $164.99/Each

Other Available Sizes:

  • Features a 16-gauge stainless steel top
  • 18-gauge type 430 stainless steel undershelf and legs
  • 700 lb. top shelf weight capacity; 540 lb. undershelf weight capacity
  • 2" high edging contains equipment and supplies
  • Increases work space
  • Easy-to-assemble
  • Great for busy commercial kitchens

UPC Code:

400010224432

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

When space is limited, this Regency 24" x 30" stainless steel equipment stand is the perfect solution!

Great for creating work stations or storing equipment away from counters, this stand is a practical addition to your busy commercial kitchen. A high weight capacity and durable construction contribute to the overall reliability of this stand so you can manage an organized, efficient kitchen!

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Durable, Stainless Steel Top

With a 16-gauge stainless steel top, this stand can support up to 700 lb. of evenly distributed weight. Great for holding a variety of equipment including mixers, slicers, and counter top ranges, you can increase your work space by adding this stand to your kitchen. The stainless steel material is easy to maintain and can be wiped clean at the end of the day.

Stainless Steel Undershelf

The 18-gauge type 430 stainless steel undershelf can hold up to 540 lb. for storing additional equipment and supplies.

2" Edging

For added security, a 2" edging comes standard to help keep equipment and other contents from sliding off and becoming damaged.

Adjustable Bullet Feet

Adjustable stainless steel bullet feet allow you to level your stand on uneven surfaces for the best possible stability.

Stainless Steel Legs

The legs of this Regency stand are also constructed of durable, easy-to-clean stainless steel to provide commercial-grade toughness.

Ships Unassembled

This stand ships unassembled to save you on shipping costs. An allen wrench and two set screws are included for easy assembly.

How to Assemble a Stainless Steel Equipment Stand

In this video, learn how to assemble your Regency stainless steel equipment stands! Also, how to adjust the height of the stands and how to add casters to them! Check it out!

Our Regency stainless steel equipment stands are a great choice to hold the counter top equipment on your cooking line. These stands are shipped to you unassembled in order to save you money on shipping. Today I’ll show you how easy it is to assemble these Regency equipment stands. First let’s take a look at the parts that come inside your box. You have the equipment stand top and you’ll see it has a 2 inch splash on three sides to keep your equipment from slipping off the stand. You have an under shelf, four legs and you’ll find a bag in the box with your legs that contains an Allen wrench and two extra set screws. The rest of the set screws are already screwed into where they belong. Note the protective film on the top of the stand and the under shelf. I recommend that you leave this on the stand until you’re finished assembling, that way you prevent scratching and scuffing. And keep in mind that especially with larger stands, having a helper can really come in handy. To assemble, first place the equipment stand top upside down on a surface that won’t scratch it. Here I’m using the cardboard box it arrived in. Next, place the four legs in the tabletop gussets. If one has trouble going in, you may have to give it a few turns to the set screws to loosen them. Now, tighten the set screws. At this point, I don’t tighten them quite all the way since I like a little bit of play when I’m adding the under shelf. To add the under shelf, which not only gives the stand extra storage but also stability, you’ll first want to decide what height you’ll want it and then mark that height on all four legs. In any food service application you’ll want that height o be at least 6 inches off the ground for food safety reasons. Once marked, slipped the under shelf onto the legs to the proper position. Work your way around and tighten the two set screws for each leg. Now tighten the set screws at the tops of the legs. The equipment stand assembly is almost finished, but before I flip it right side up I wanted to show you the adjustable feed on these equipment stands. Whether you’re putting the table on an uneven surface, or just need to raise it or lower it you’ll appreciate that simply by turning the foot you can adjust the height by up to an inch and a quarter. Do you need casters for you equipment stand? Use our cut down feature in order to both shorten the stand to allow for casters and to buy the casters themselves. Thank you for watching, and if you have any questions please feel free to use our live chat button.

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Length: 30 Inches
  • Width: 24 Inches
  • Height: 26 Inches
Shelf Capacity:
  • Top Shelf: 700 lb.
  • Undershelf: 540 lb.
Spec Sheet Specsheet Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Regency 24" x 30" 16-Gauge Stainless Steel Equipment Stand With Undershelf

    5.0 stars from 6 reviews

    6
    0
    0
    0
    0

    People Talk About:

    Great stands stainless stand steel boards better cut down easy

    Regency 24" x 30" Stainless Steel Equipment Stands are heavy duty and generally used to put a Griddle or Char-Broiler on. We use them quite frequently inside units that are manufactured by Hurricane Concessions & Rentals.

    from Hurricane Concessions & Rentals, LLC Posted on

    We use this as a stand for our 300 lb ice cream machine. It holds her true and steady at a nice working height. Much better than the expensive stand from the manufacturer.

    from Little Lion Ice Cream Posted on

    This is much better than I thought it would be for the money!!! Very happy with it. I put a 20 quart mixer on it, and it's strong as an ox. The leveling legs are long enough to help level the stand on even the more uneven floors. Also, very easy to put together

    from Bagels on Hudson Posted on

    All stainless steel unlike other equipment stands that are galvanized. Great quality but get them cut down through webstaurant store because its difficult to cut down stainless steel.

    Posted on

    This table is great. I am using it for the base of a convection oven I purchased used. It looks great and easy to clean. Then shelf under it is useful as well.

    from DMS Food Creations Posted on

    This product is great for an all purpose work space. A wood board can be placed on top for bread work or cutting boards placed on top. The under shelf adds a lot of extra storage space!

    Posted on

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register