$62.99/Each

  • Compatible with Nemco Easy Tomato Slicer II
  • Replaces standard blade assembly on the 56600-3 Easy Tomato Slicer II
  • Blade assembly includes 7 blades
  • Scalloped blades for faster, cleaner cut
Item:
591SC5663
Units:
Each
Shipping:
Usually Ships in 3-4 Business Days
MFR Item:
SC566-3
Condition:
New

Companion Items

Tomato Slicer Blade Replacement

Tomato Slicer Blade Replacement

Changing blades on your tomato slicer is a quick and easy way to make your old tomato slicer cut like it’s brand new. Here are some easy instructions. First, remove the thumb screws and the slide stop from the end of your slide board. Then you’ll remove the pusher block assembly. You’ll see, this just slides right off. Next, remove the blade holder assembly by unscrewing the hex-head bolts on either side of the blade holder casting. Now be careful removing the blade holder assembly so that you don’t touch the sharp edges of the blades. Now, take your new blade set assembly, and insert the blades into the casting with the sharp side toward where the pusher assembly normally sits. Make sure the holes at either end of the assembly align with the holes of the blade holder casting. First, insert the two hex-head screws on the right end of the blade holder, nearest the words “caution sharp blades.” Fully tighten these two, alternating a quarter turn until they are fully tightened. Then, install the screws on the other side of the casting. Again, tighten each screw a quarter turn, alternating until fully tightened. Finally, reinstall the pusher block assembly by simply sliding it on. Once you’ve done that, you can move the pusher block through the blade set to make sure it’s installed properly. Then you’ll reinstall the slide stop with the thumb screws. Now that you’ve seen how easy it is to change the blades on your tomato slicer, I have one more recommendation: You must have an extra set of blades on hand at all times. You never know what could happen, and if you count on sliced tomatoes, you can really make your life easier by having an extra set of blades. Thanks for watching, and please, if you have any question, feel free to use our live chat button!

Copy and paste the embed code above.

Need to replace the blade on your tomato slicer? Check out this step-by-step visual demonstration to learn how!

Details

Change the blades on your Easy Tomato Slicer II to a scalloped configuration with the Nemco SC566-3 3/8" blade assembly! This blade assembly quickly switches out with the one that came with your original equipment so that you can continue producing premium ingredients during your busiest hours.

It can be used to replace a standard blade assembly on the 56600-2 Easy Tomato Slicer II, or convert another Easy Tomato Slicer to a 3/8" cut (requires a compatible pusher, see Companion Items)

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order once it is placed.

Compatible Models

This item is compatible with the listed models, according to the manufacturer. We do our best to keep this listing as accurate and up-to-date as possible. If you have any questions or concerns, feel free to contact a Customer Solutions Specialist before placing your order.

Downloads

Easy Tomato Slicer II Operation / Parts Manual Manual Nemco's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products

berkel sharpener assembly