• Free Shipping!  

$3,980.90/Each

Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

  • Occupies minimal counter space
  • 120/60/1 electrical connection
  • 11 lb. per minute production capability
  • 420 RPM plate speed
  • Easy-to-operate ON-OFF switches
  • Includes 6 processing plates
  • Convenient angled front

UPC Code:

400010643615

Condition:

New
Shipping:

Usually Ships in 3-4 Weeks

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

View All Items
Hobart FP100 Continuous Feed Food Processor

Hobart FP100 Continuous Feed Food Processor

The following operator training video on Hobart FP100 and FP300 food processors is a supplement to the instruction manual that came with your food processor. If you have any questions concerning operation, please consult your manual. Your Hobart food processor is constructed and designed to give long satisfactory service, provided it is properly used and maintained. This training video will cover the controls, operation, cleaning, and maintenance of the FP100 and FP300 food processors. For demonstration purposes, we will be using the FP100. Warning. Rotating knives inside. Always use the pusher plate. Keep hands out. Your Hobart food processor is used for slicing, shredding, grating, julienne cutting and dicing vegetables, fruits, or cheeses. The compact unit is designed for ease of operation and quick cleaning. Proper assembly, including selection of the appropriate cutters, is necessary for correct operation of the food processor. Refer to the cutting tool guide for cutters and refer to the appropriate operation instructions in your manual. To start the processor, push the green start button. To stop the unit, press the red stop button. Warning. Rotating Knives inside. Always use the pusher plate. Keep hands out. Interlock switches prevent the machine from operating when the feed hopper is out of position or the pusher plate is raised. During operation, the pusher plate is fully raised above the feed hopper, the machine stops and allows the pusher plate to be rotated counter clockwise for loading. To continue operation, rotate the pusher plate clockwise until it's directly above the feed hopper. As the pusher plate begins to lower into the hopper, the machine will restart. You don't need to push the green start switch unless stop was pressed. Always push the red stop switch before changing cutters or cleaning. First, grasp the pistol grip handle, raise the pusher plate, and turn it to the left. Now, release the feed hopper lock, by turning the finger paddle counter clockwise. Then raise the feed hopper. Lower the flinger plate onto the knife shaft until the flinger plate seats on the shaft pin. Next, select the appropriate plate for the job. Place the plate on the shaft, turning until engaged. Finally, lower the feed head. Note, when the pusher plate is rotated and lowered, the feed head will automatically be locked. For operation that requires two plates, first raise the pusher plate and turn it to the left. Now, release the feed hopper lock by turning the finger paddle counter clockwise. Then raise the feed hopper. Lower the flinger plate on the knife shaft until the flinger plate seats on the shaft pin. Select the proper size dicing plate and place it directly on the knife shaft above the ejector plate. Select the appropriate slicing plate for the job by consulting the cutting tool guide in your instruction manual. Place the slicing blade on the shaft, turning until engaged. Finally, lower the feed head. Note, when the pusher plate is rotated and lowered, the feed head will automatically be locked. After the pusher plate is raised, prepared product such as potatoes, carrots, onions, lettuce, cabbage etcetera can be placed in the large feed hopper. For best results, it's advisable to remove the tops and tails from products such as lemons, limes, or onions and place them in the hopper perpendicular to the desired cut. When cutting French fries with the julienne cutter, position the potatoes at the lower right corner of the large feed hopper. Potatoes may be stacked to cut several at one time. For consistent results, stack the product in the lower right corner of the feed hopper, one pile only. Push the knob to release the catch on the feed tube pusher and pull out to reveal the feed tube opening. The feed tube is used for slicing long, thin shaped products such as cucumbers or carrots, or contain small products like radishes. The machine doesn't stop when the feed tube pusher is removed. This allows product to be processed continuously. Always use the feed tube pusher. Warning. Turn the machine off and unplug the electrical cord before cleaning. Clean the machine immediately after each use. Dismantle all removable parts from the machine and wash them in warm water and detergent. Rinse thoroughly and wipe dry with a soft, clean cloth. Wipe the exterior of the machine with a damp cloth. Allowing food juices to dry on the machine may cause discoloration. Never clean the cutting tools or other aluminum parts in highly alkaline dishwashing solutions or in excessively hot water. This can cause formation of aluminum oxide which will appear black. Do nut use steel wool or sharp objects for cleaning machine surfaces if they become discolored; scratched surfaces become hard to keep clean. Remove the feed tube pusher and rinse in luke warm water. Raise the pusher plate and turn it to the left. Remove the feed hopper and rinse it in lukewarm water. Lift out the cutting plate. If you have used the dicing grid, push the remaining leftovers through the grid with a nylon brush before removing. Remove the dicing plate and flinger plate. Rinse in lukewarm water. Turn the pusher plate back counter clockwise over the feed hopper and lower. Place a pan under the exit chute and pour lukewarm water from the top through the knife chain. Run a wet cloth through the feed tube. Wipe with a clean, dry cloth. Return the cutting tools to the wall rack. Lower the flinger plate on the knife shaft until the flinger plate seats on the shaft pin. Place the feed hopper on the hinge pins and lower to normal position. Turn and lower the pusher plate. Replace the feed tube pusher. Warning. Turn the machine off and unplug the electrical cord before doing any maintenance. Routinely inspect the machine to ensure that it's in proper working order. Blades must be clean, intact, and sharp. Regularly lubricate the pusher plate shaft with a drop of mineral oil, not cooking oil. If the machine develops any problems, contact your local Hobart service office. Depending on usage, dicing grids become dull from wear with an average life expectancy from 8 to 18 months. Dicing grids can't be resharpened and are therefore expendable. Replacement dicing grids are available from your local Hobart service office. This concludes operator training for the Hobart FP100 and FP300 food processors. To obtain service and parts information concerning the processors, contact your local Hobart service office.

Copy and paste the embed code above.

Learn how to operate, clean, and maintain Hobart FP100 and FP300 food processors by checking out this quick video!

Specs
Width 8 13/16 Inches
Depth 16 11/16 Inches
Height 19 1/2 Inches
Amps 3.5 Amps
Hertz 60
Phase 1
Voltage 120
Wattage 420 Watts
Horsepower 1/3 HP
Made in America Yes
NSF Listed Yes
Number of Discs / Blades Included 6
Power Type Electric
RPM 420
Speeds 1 Speed
Type Continuous Feed Processors

Details

The Hobart FP100-1B continuous feed food processor comes complete with everything you need to quickly slice or shred fresh vegetables, fruits, and even cheese. It includes (1) 1/16" slicer plate, (1) 3/8" slicer plate, (1) 5/32" slicer plate, (1) 7/32" slicer plate, (1) 3/8" dicer plate, and (1) 3/16" shredder plate.

Each unit is designed with a 50 degree angled front for operator convenience and rapid product loading. A large, half size feed hopper supports processing capabilities for a wide variety of products, while permitting continuous cutting of long products. Never precut again!

With its simple on-off switches and an interlocking switch that keeps the machine from operating when the lid and pusher plate aren't correctly in place, you can be sure that this food processor is an easy-to-use, efficient, and safe product for your commercial kitchen. With a 420 RPM plate speed, this unit quickly and easily cuts, chops, slices, and dices whatever you need to process to help your commercial kitchen reach optimum productivity.

Are you short on counter space, but still in need of a food processing workhorse? This unit takes up minimal counter space with its small 8 13/16" wide footprint but still manages to process up to 11 lb. of product per minute-that's 660 lb. per hour!

The Hobart FP100-1B continuous feed food processor features a powerful 1/3 hp, 3.5 amp motor with overload protection.

Overall Dimensions:
Width: 8 13/16"
Depth: 16 11/16"
Height: 19 1/2"

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order once it is placed.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Spec Sheet Specsheet Manual Manual Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Other Products from this Line

Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register