The Frymaster MJ35 fryer has a minimum
30-Ib and maximum 40-lbs shortening
capacity. The frying area of the Frymaster
MJ35 is 12 x 15 in. The 110,000 BTU/hr.
Frymaster MJ35 is specifically designed for
all-purpose frying. The Frymaster MJ35
produces 65 lbs. of
french fries per hour - frozen to done. The
exclusive 1° action thermostat extends
shortening life and produces a more
uniformly-cooked product. The Frymaster
MJ35 has centerline
thermostat mounting, which permits quick
sensing of cold food placed in either
basket. Unique Master Jet burners have no
burner tube radiants to burn out. No burner
cleaning or air shutter adjustment is
required on the Frymaster MJ35. The open
frypot has a large heat
transfer area to fry more product per load.
The open-pot design of the Frymaster
MJ35 has no hard-to-clean
tubes. Every inch of the frypot and cold
zone can be cleaned and wiped down by
hand. The large cold zone catches crumbs
and sediment from the frying area. These
particles are trapped in the cold zone
where they do not carbonize, contaminate
shortening or cling to fried products. The
Frymaster MJ35 measures in at 46"H x
15.62"W x 31.55"L. All components on the
Frymaster MJ35 are warranted for one year
parts and labor. The stainless steel frypot
is covered by a lifetime warranty. *Pictured
with optional casters, sold separately*
Manufacturer’s Item Numbers: MJ35SD LP GAS, MJ35SD NAT GAS
About Common Carrier Shipments: We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
